Deprag 346-138U, Руководство по эксплуатации

Страница: 12 / 40

12
Exchange of clutch spring (see picture)
1. Disconnect screwdriver from air supply.
2. Unscrew the clutch bearing complete with the spring sleeve (Accessories -
Optional equipment) (left-hand thread).
3. Take out the complete clutch.
4.
For screwdriver version 346-1/2/738U (clutch 389748 B/D): Insert the
supplied hand screwdriver 326240 into the half-round bore of the lock
ring and turn hand screwdriver clockwise, until the adjustment nut comes
off.
For screwdriver version 346-3/438U (clutch 396030 B): Slide the sup-
plied spanner 805491 (AF 11) over the hex of the clutch shaft and un-
screw the adjustment nut by means of spanner 800408 (AF 19).
5. Remove lock ring.
6. Exchange clutch spring and reassemble clutch in reverse order.
7. Insert clutch into the clutch bearing and tighten clutch bearing complete
with spring sleeve to the DEPRAG-Screwdriver (left-hand thread).
Attention:
The claw of the clutch must engage with the claw of the spindle
(in clutch bearing ).
The hex AF 11 of the clutch shaft must engage with the hex of
the spindle (in gearing).
Picture: Exchange of clutch spring - screwdriver type 346-1/2/738U (clutch 389748 B/D)
clutch spring half-round
bore
adjustment nut