Depaepe 27112017, Руководство пользователя

Страница: 28 / 49

SecurAccess SIP PMR – User Guide EN
28
Note 2: in ‘P2P ’ (peer to peer) mode, the IP address of a phone can be stored with the
‘xxx.xxx.xxx.xxx’ format.
Do not fill out other fields of the phonebook form , if you want to simply dial one
number when depressing a dialling button , without chain dialling, group calling, or calendar
control management features.
Click on ‘ Save ’ button to save modifications.
2) You can proceed in the same way for every dialling buttons of your SecurAccess SIP PMR,
up to the tab ‘8’.
4.4.2. To dial in chain up to 5 numbers
This feature, when activated, will automatically keep on dialing a sequence of numbers stored
into the same dialling button if the other party does not answer or if busy line tone is detected,
it will only stop when another party answers.
Up to 5 different numbers can be stored in each key (phonebook page), and the dialing
sequence can be repeated up to 9 times (see §6.1 DoorPhone - Ringing cycle count p 36).
Time elapsed before the next call can be adjusted (see §6.1 - Ringing timeout p 36).
To access dialling buttons phonebooks, to enable them or to switch from one to another, please
see § Buttons web pages access
(here above).
On the dialling button phonebook web page (screenshot here above) you want to program:
1) Fill out the ‘1. call number’ field : entry the phone number to be dialled when depressing
the dialling button.
Note 1: in SIP server mode (doorphone connected to a PABX), if needed, insert a ‘0’ or a ‘9’
before, to dial the phone number on the public network.
Note 2: in ‘P2P ’ (peer to peer) mode, the IP address of a phone can be stored with the
‘xxx.xxx.xxx.xxx’ format.
2) In the ‘Calling’ field select ‘Sequential’ to activate the chain dialling with the next number.
3) Entry the 2 nd number to be dialed in the ‘2. call number’ field, in case of no answer or a
busy line tone is detected on the 1
st
number call.
4) If you need to program another number), in the ‘Calling’ field select ‘Sequential’ to activate
the chain dialling with the next number.
5) You can proceed in the same way for following numbers programming (up to 5 different
numbers can be stored on phonebook page), up to the ‘5. call number’ and ‘Calling’ fields.
Click on ‘ Save ’ button to save modifications.
6) You can proceed in the same way for every dialling buttons of your SecurAccess SIP PMR,
up to the tab ‘8’.
4.4.3. To call a group of numbers (up to 5)
The SecurAccess SIP PMR doorphone can simultaneously call up to 5 phones, with different
numbers, thanks to the ‘Group calling’ feature.
When one of the called parties picks up the call, the ringing to other group subscribers will be
ended.
To access dialling buttons phonebooks, to enable them or to switch from one to another, please
see § Buttons web pages access
(here above).