Depaepe 27112017, Руководство пользователя

Страница: 18 / 49

SecurAccess SIP PMR – User Guide EN
18
3. Timed conversation duration elapsed
3.5. Remote door latch activation
A party called by the SecurAccess SIP PMR can activate the door latches relays by entering one
of the stored codes (once the codes have been configured, see §5.4 Relays and door latches
codes p 34) corresponding to the relay, during the conversation and on a tone
telephone keypad.
- If a right code is entered, the corresponding door latch will be activated, the ‘door’
icon
lights up and the ‘door is open’ voice message is played.
- If a wrong code is entered, nothing will happen in the next 3 seconds, the unit will not hang up
waiting for the right code.
- If the same code is assigned to the two door latches relays, the two relays will be activated
according to their respective activation time.
Note : - the door latch code can be stored in a one touch memory button of the called party.
- door latch activation times can be configured (see §5.4 p 34).
Important: - activation of this code requires a Tone compatible telephone and PABX.
- the door latch n°1 is for opening doors use only, because disabled help signallings
are associated with it.
The called party, using a PC with the dedicated Depaepe software , can activate door latches
by clicking on ‘key’ buttons in the bottom right corner of the screen.
To install and to set the dedicated Depaepe software for PC, please see §8 Video pop-up for PC
p 44.
Note : a SecurAccess SIP PMR allows to activate/deactivate door latch codes according to time
and day by programmable calendar control.
3.6. Local door latch activation
Only models with keypad have an additional lower button named Door button
and allowing opening the door by entering keypad code (see p 7).
Press the door button, you can hear a beep tone,
then enter with the keypad one
of the stored codes (once the codes have been configured, see §5.4 Relays and
door latches codes p 34) corresponding to the relay.
- If a right code is entered, the corresponding door latch will be activated, the ‘door’ icon lights
up and the ‘door is open’ voice message is played.
- If a wrong code is entered, the ‘error’ voice message is played, the unit will not hang up
waiting for the right code.
- If the same code is assigned to the two door latches relays, the two relays will be activated
according to their respective activation time.
Note : - door latch activation times can be configured (see §5.4 p 34).
- a SecurAccess SIP PMR allows to activate/deactivate door latch codes according to time and
day by programmable calendar control.
Important: the door latch n°1 is for opening doors use only, because disabled help
signallings are associated with it.