Depaepe 27112017, Руководство пользователя

Страница: 34 / 49

SecurAccess SIP PMR – User Guide EN
34
5.4. Relays and door latches codes
The SecurAccess SIP PMR is fitted with two NC/Com/NO driving relays (see connection p 11),
and can activate them when entering a stored code for opening doors or airlock-like doors,
locally thanks to the doorphone keypad, or remotely in DTMF during a call or thanks to the
dedicated PC software.
The door latch n°1 is for opening doors use only, because disabled help signallings are
associated with it.
Only the second relay can also be used as a dry contact for driving an alarm, an external
camera, a light, or an auxiliary ringer…
Via the ‘Basic settings’ page, select ‘Relay’. The web page of the relay n°1 will appear, and
the following settings can be modified:
1) Fill out fields:
Enable: mark to activate the relay.
Timetable : activate/deactivate the relay by timetable control. In the drop-down menu, select
the timetable name you want to assign to the relay, or ‘None’ for no timetable control.
Relay mode:
Monostable , the relay is closed by a code and after a preprogrammed timeout it is open.
Used for an electrical lock switching, a sliding doors control, a signalling button etc…
or bistable , the relay is closed by a code and is still closed until a Off code is dialled.
Delay time (sec) : duration between closing code evaluation and relay closing. It has no
influence on open code which is immediately performed.
Run time (sec): in monostable relay mode, relay closing duration, which is calculated from
relay effective closing.
Source : by default Relay 1.
Synchronize delay (sec): duration between the start and the end of relays opening. Used for
the delayed airlock-like doors application.
Activation on call :
None, call has no influence on relay status
Incoming call , relay is closed during an incoming call