Dentsply Sirona inEos X5, Руководство по эксплуатации

Страница: 9 / 56

Dentsply Sirona
Operating Instructions inEos X5 3 Safety
3.1 Basic safety information
64 17 096 D3586
D3586.201.01.11.02 07.2018
9
3
Safety
3.1
Basic safety information
3.1.1 Prerequisites
NOTE
Important information on building installation
The building installation must be performed by a qualified expert in
compliance with the national regulations. DIN VDE 0100-710 applies
in Germany.
NOTE
Restrictions regarding installation site
The system is not intended for operation in areas subject to explosion
hazards.
NOTE
Do not damage the unit!
The unit can be damaged if opened improperly.
It is expressly prohibited to open the unit with tools!
3.1.2 Connecting the unit
Perform connection by following the directions given in the present
operating instructions.
3.1.3 Connection of external equipment
If any equipment not approved by Sirona is connected, it must comply
with the applicable standards:
● EN 60 950 for information technology equipment, and
● EN 61 010-1 for laboratory equipment.
3.1.4 Maintenance and repair
● The maintenance and repair of this unit may be performed only by
Dentsply Sirona or by agencies authorized by Dentsply Sirona.
● Components which have failed and influence the safety of the unit
must be replaced with original (OEM) spare parts.
Please request a certificate whenever you have such work performed. It
should include:
● The type and scope of work.
● Any changes made in the rated parameters or working range.
● Date, name of company and signature.
3.1.5 Modifications to the product
Modifications to this product which may affect the safety of the operator,
patients or third parties are prohibited by law!