Dentsply Sirona inEos X5, Руководство по эксплуатации

Страница: 17 / 56

Dentsply Sirona
Operating Instructions inEos X5 4 Technical description
4.4 System requirements
64 17 096 D3586
D3586.201.01.11.02 07.2018
17
Tests/approvals This unit complies with the following requirements:
DIN EN 61 010-1: 2011 (safety)
DIN EN 61 326-1: 2006 (EMC)
DIN EN ISO 12 100: 2011 (risk management)
4.4
System requirements
A 64-bit inLab 4 PC is required to run this software. The hardware
version must be PC hardware version 2.0.1 or higher.
4.5 Electromagnetic compatibility
Observance of the following information is necessary to ensure safe
operation regarding EMC aspects.
inEos X5 complies with the requirements for electromagnetic
compatibility (EMC) according to DIN EN 61326-1:2006-10.
inEos X5 is hereinafter referred to as "UNIT".
4.5.1 Electromagnetic emission
The UNIT is intended for operation in the electromagnetic environment
specified below.
The customer or user of the UNIT should make sure that it is used in
such an environment.
Emission measurement Conformity Electromagnetic environment - guidelines
RF emissions according to CISPR 11 Group 1 The UNIT uses RF energy only for its internal
function. Therefore, its RF emissions are very low
and are not likely to cause any interference in
nearby electronic equipment.
RF emissions according to CISPR 11 Class B The UNIT is intended for use in all facilities, in-
cluding residential areas and in any facilities con-
nected directly to a public power supply providing
electricity to buildings used for residential pur-
poses.
Harmonics
according to IEC 61000-3-2 Class A
Voltage fluctuations / flicker according
to IEC 61000-3-3 coincides