18
MAIN FRAME ASSEMBLY
The Main Frame Assembly is supplied as a unit with the Drive Motor and Main Drive Chain
Assembly. These additional components are already in place: Solution Heating Pad, Temperature
Sensor, two Solution Drain Plugs, two stainless steel Solution Trays, two Transport Modules,
two Evaporator Plates (Solution Tray Covers) and a Washer/Dryer Module. The two Evaporator
Plates are color-coded red for developer and blue for fixer to help prevent contamination of the
chemistry.
WASHER/DRYER MODULE
This module incorporates four pairs of opposed tubular spray washers providing four separate
washes of the film as it passes through the first five pairs of rollers. A removable Heater/Fan
Assembly for drying the film as it passes through the remainder of the module is contained in the
module itself.
DEVELOPER AND FIXER TRANSPORT MODULES
The Developer and Fixer Transport Modules are identical. The rollers transport the film through
the developer and fixer solutions and into the Washer/Dryer Module. The Transports are
suspended in the Solution Trays by means of four supporting points called Hanger Assemblies
that seat into notches molded into the Main Frame. A spring-loaded drive shaft provides coupling
with the associated Drive Sprocket Assembly in the Main Frame. A built-in paddle on the bottom
of each Transport Module
provides automatic solution agitation during processing.
CAUTION: For best results, do not interchange the Developer and Fixer Transports.
Even minor residues from Fixer chemicals can contaminate the Developer solution.
OTHER ITEMS SUPPLIED WITH PROCESSOR
Supplied with the processor is a 1 1/4" (3.2 cm) O.D. X 36" (91.5 cm) long flexible Drain Hose,
Hose Clamp, two Wash Pans for cleaning the Transort Modules and a 36" (91.5 cm) long Water
Supply Hose with Solenoid valve which is terminated with a garden hose fitting to connect with
a water supply faucet. A drive train oiler, two scrub brushes and an 810 Basic or 9000
Operations label are provided.
Figure 4a: 810 Basic Processor on Stand with optional
Water Recirculator
and
Chemical
Drain Kit
installed for No-Plumbing operation (See Page 5 for Optional Accessories)
Water Supply Hose
Collection Containers
Note: Chemical Drain Kit P/N 873-020007
consists of two (2) Funnels which are screwed
into the base in place of the two (2) nylon bolts
which are supplied with the machine and two
chemical hoses. The red hose is connected to
the funnel which is directly under the drain and
overflow for the developer and the blue hose is
connected to the funnel which is directly under
the drain and overflow for the fixer. Each hose
is routed to a collection container.
Seven Gallon Water Reservoir with Pump
Chemical Drain Hoses
