Denso QK20-R Скачать руководство пользователя | Manualshive

Страница: 32 / 122

background image

21

7.1.1.3 Extracting AI (Application Identifier)-prefixed strings

If the scanner reads any of GS1-128 (EAN-128), RSS (GS1 DataBar), and EAN.UCC Composite symbols (excluding
linear components in a UPC/EAN Composite symbol), it edits the data according to AIs and outputs it in the data
transmission format selected in the scanner (see Chapter 9, Section 9.4).
The "AI-prefixed string" extraction is available in two modes--AI-delimited mode and AI parenthesizing mode. AIs to
be used for data editing are listed in (3) AI table later.

(1) AI-delimited mode

In this mode, the scanner extracts strings prefixed with AIs specified (up to three types of AIs) and separates them
with the specified delimiters (selectable from headers/terminators, commas and tabs) instead of AIs to output them.

Extraction conditions

Extraction conditions

Choices

"Data transfer regardless of error result"

Permit/Prohibit

If the scanner fails to extract an AI-prefixed string when the "Data transfer regardless of error result" is permitted, it
outputs the data read as is without editing.

Delimiters



•

Header/terminator

Specifying a header/terminator as delimiters prefixes a header and suffixes a terminator to each element string

separated.

A scanner ID, code ID mark, the number of digits, prefix, and suffix can be also added to each element string if

their transmissions are enabled. The number of digits is the count of each element string edited.
Example Data read: (01)94901234567894(11)030808(13)030810

Header: STX, Terminator: ETX, Scanner ID: Disable, Code ID mark: Disable,

Transmission of the number of digits: Enable, Prefix/Suffix: None, BCC: Disable

AIs specified

Output data

01,11,13 [STX]001494901234567894[ETX][STX]0006030808[ETX][STX]0006030810[ETX]

•

Comma

Specifying a comma as delimiters outputs comma-delimited data. No comma follows the tail of the data.
A header and terminator are added to the full string. None of a scanner ID, code ID mark, the number of digits,

prefix, and suffix is added even if their transmissions are enabled.
Example Data read: (01)94901234567894(11)030808(13)030810

Header: STX, Terminator: ETX, Scanner ID: Disable, Code ID mark: Disable,

Transmission of the number of digits: Disable, Prefix/Suffix: None, BCC: Disable

AIs specified

Output data

01,11,13 [STX]94901234567894,030808,030810[ETX]

•

Tab (ASCII 09H (HT))

Specifying a tab as delimiters outputs tab-delimited data. No tab follows the tail of the data.
A header and terminator are added to the full string. None of a scanner ID, code ID mark, the number of digits,

prefix, and suffix is added even if their transmissions are enabled.
Example Data read: (01)94901234567894(11)030808(13)030810

Header: STX, Terminator: ETX, Scanner ID: Disable, Code ID mark: Disable,

Transmission of the number of digits: Disable, Prefix/Suffix: None, BCC: Disable

AIs specified

Output data

01,11,13 [STX]94901234567894[TAB]030808[TAB]030810[ETX]

«
...
30
31
32
33
34
...
»

Содержание QK20-R



























































































































Отзывы:

Нет отзывов

Похожие инструкции для QK20-R

Бренд: Uniden Страницы: 100

Astra 1220 Series

Бренд: UMAX Technologies Страницы: 20

MorphoSmart MSO300

Бренд: Safran Страницы: 44

A4 Multi-Purpose

Бренд: Digi-Frame Страницы: 26

Бренд: Avision Страницы: 106

Бренд: Bell and Howell Страницы: 142

Бренд: Nikon Страницы: 82

Бренд: Kogan Страницы: 20

Бренд: Opticon Страницы: 73

OS 11000 Hybrid Color

Бренд: Zeutschel Страницы: 68

Бренд: Uniden Страницы: 10

Бренд: Uniden Страницы: 35

Бренд: Panasonic Страницы: 61

Бренд: Canon Страницы: 154

Бренд: Hart InterCivic Страницы: 36

Бренд: Hart InterCivic Страницы: 56

220P - imageFORMULA ScanFront

Бренд: Canon Страницы: 156

Бренд: Canon Страницы: 82

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды