Windows2000
②
①
Make sure that the driver is
correctly installed.
On the control panel, click
System
->
System Properties
->
①
Hardware
tab
->
②
Device Manager
tab. The Device
Manager screen is displayed.
If the Completion screen appears at the end of
driver installation, click
Finish
.
➏
➎
Notes on COM Port Number:
1. To access to the DENSO WAVE USB-SER
Comm.Port
from the application software,
you need the COM port number identified by
the device manager.
2. The COM port number may be changed if
another port is connected the PR-450UDM.
If
DENSO WAVE USB-SER Comm.Port
is not
added or marked with “!” or “X”, remove the driver,
reboot the computer, and then reinstall the driver
according to the procedure specified in “Uninstalling
the driver” in page 11.
➐
If
DENSO WAVE USB-SER Comm.Port
is added
to the sub-tree of
Ports (COM & LPT)
as shown
above, the driver is successfully installed.
10
