Preface
The PR-450UDM reader/writer, which is easy to plug in to your host computer with a USB cable, is an
IC card reader/writer capable of reading contactless IC cards.
This user’s manual sets forth the procedures for handling, setting and operating this product. You
should study it carefully to make sure that you use this product both correctly and effectively before
starting the operation.
About This Document
●
All rights in this document are reserved by DENSO WAVE INCORPORATED.
No part of this publication may be reproduced in any form or by any means without permission in
writing from the publisher.
●
The information in this manual are subject to change without prior notice.
●
Please contact us if you have lost this document.
Related Documents
You need the following manuals for the development of applications for IC cards.
・
PR-450UDM Command Manual
A manual describing how to create the programs for controlling IC cards.
・
FeliCa Card Control Command Manual
A guideline on the commands exclusively used to control FeliCa cards.
You should read this manual in line with the PR-450UDM Command Manual.
・
Mifare Card Control Command Manual
A guideline on the commands exclusively used to control Mifare cards.
You should read this manual in line with the PR-450UDM Command Manual.
・
Communication Security Manual
A guideline on the commands used to create application programs that need high security, for
example, two-way authentication.
You should read this manual in line with the PR-450UDM Command Manual and the FeliCa Card
Control Command Manual or Mifare Card Control Command Manual.
1
