Before Starting the PR-450UDM
Preparation
You should first go through the following procedure before starting the PR-450UDM setup.
Cancel the computer’s power supply control setting.
This reader/writer does not support such power supply control functions as “standby”, “sleep”,
“resume” and “hibernation”.
You need to turn off these functions before starting the setup procedure.
Login the computer with the administrator’s right.
➊
➋
In Windows XP/2000, installing the driver requires the administrator’s right.
Start your computer at the right of administrator before moving to the setup procedure.
Prepare a driver.
➌
Using the PR-450UDM requires you to install the dedicated USB driver provided by DENSO
WAVE. You need to downloaded this driver from our website at
http://www.denso-wave.com
before starting the setup procedure.
The file downloaded is a self-extracting file, containing a driver and an uninstaller in
compressed form. Double-click the file icon and the file is decompressed by itself.
At this time, you are recommended to write down the destination of the file to save, as you
need it when installing the driver later on.
NOTE
If the old version of PR-400 driver is already installed in your computer, you need
to remove it with the uninstaller “Pcd_SeRemover” before installing the driver.
4
