WindowsXP
➎
Check that the driver is now properly
installed.
➏
①
②
If
DENSO WAVE USB-SER Comm.Port
is
added to the sub-tree of
Ports (COM & LPT)
as shown above, the driver is successfully
installed.
On the control panel, click
System
->
System Properties
->
①
Hardware
tab
->
②
Device Manager
tab. The Device
Manager screen is displayed.
Notes on COM Port Number:
1. To access to the DENSO WAVE USB-SER
Comm.Port
from the application software,
you need the COM port number identified by
the device manager.
2. The COM port number may be changed if
another port is connected the PR-450UDM.
If
DENSO WAVE USB-SER Comm.Port
is not
added or marked with “!” or “X”, remove the driver,
reboot the computer, and then reinstall the driver
according to the procedure specified in “Uninstalling
the driver” in page 11.
8
