Denso BHT-604Q, Руководство пользователя

Страница: 9 / 184

viii
2D Code Handy Terminal
Handling the battery cartridge

Never disassemble or heat the battery cartridge, nor put it into fire or water; doing so could cause
battery-rupture or leakage of battery fluid, resulting in a fire or bodily injury.

Do not carry or store the battery cartridge together with metallic ball-point pens, necklaces, coins,
hairpins, etc.
Doing so could short-circuit the terminal pins, causing the batteries to rupture or the battery fluid to leak,
resulting in a fire or bodily injury.

Never put the battery cartridge into a microwave oven or high-pressure container.
Doing so could cause the batteries to break, generate heat, rupture or burn.

Avoid dropping the battery cartridge or letting it undergo any shock or impact.
Doing so could cause the batteries to break, generate heat, rupture or burn.

Never charge the rechargeable battery cartridge where any inflammable gases may be emitted; doing
so could cause fire.

Only use the dedicated charger for charging the rechargeable battery cartridge.
Using a different type of charger could cause battery-rupture or leakage of battery fluid and result in a
fire, bodily injury, or serious damage to property.
Handling the BHT

The BHT uses a laser light for indicating the scanning range. Though the intensity of the laser light is
too low to inflict bodily injury.
You must observe the following precautions when handling the BHT equipped with laser light:
1) Never stare into the laser light.
2) Never point the code reading window at someone’s eyes.
The BHT complies with IEC 60825-1:1993+A2:2001.
In accordance with Clause 5, IEC 60825-1, the following information is provided to the user:
Caution - Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous laser light exposure.

Never put the BHT into a microwave oven or high-pressure container.
Doing so could cause the BHT to break, generate heat, rupture or burn.
LASER LIGHT
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
Reading window
(Laser light emission window)