Denso BHT-604Q Скачать руководство пользователя страница 135

Страница: 135 / 184

123

2D Code Handy Terminal

4.5.11 D

(SYSTEM PARAMETER Menu)

ett

g environment Settings”.

he same settings can be set at another BHT by copying the system pa

computer and so on.

e at another BHT.

plement -

The system parameter file can also be copied directly betwee
their respective UPLOAD and DOWNLOAD menus.
Refer to section “4.5.4 Copying Files between 2 BHT Units” for details of the copy

ownloading/Uploading the BHT System Parame er File

ings such as values, LCD

rameter file to that BHT.

n two BHT units by opening

The system parameter file (file name: “_BHT.SYS”) is a file containing s

contrast and beeper volume set at section “4.5.5 Settin

Copying the System Parameter File

(1) Upload the system parameter file to the host

(2) Download the uploaded system parameter fil

- Sup

method.



ploading the System Parameter File

reate a system parameter file based on the current setting values and upload it to the host computer and

on. After uploading, delete the created system parameter file.



ownloading the System Parameter File

eceive the system parameter file from the host computer and so on to which it was backed up, and after

etting the stored values, delete the received system parameter file.

The communication parameters, communication protocol, and interface set at “[5] Setting the

communication environment” in section “4.5.5 System Environment Settings” are used when uploading

and downloading.

Use the following procedure to download and upload the system parameter file.

Press the

key while holding down the

key at the SYSTEM MENU.

The SYSTEM PARAMETER menu screen displays as shown on the right.

[1: Download]:

Downloads the BHT system parameter file to the BHT user area.

[2: UPLOAD]:

Uploads the BHT system parameter file stored in the BHT.

Refer to the following section for details of the above items.

Press the

key to return to the SYSTEM MENU.

C
so

Содержание BHT-604Q

























































































































































































Результаты поиска

Содержание BHT-604Q

Отзывы:

Похожие инструкции для BHT-604Q

Бренды по названию

Популярные бренды

Denso BHT-604Q, Руководство пользователя

Результаты поиска

Содержание BHT-604Q

Отзывы:

Похожие инструкции для BHT-604Q

Бренды по названию

Популярные бренды