Denso BHT-1306B, Руководство пользователя

Страница: 50 / 256

38
BHT-1300B Series
3.5.2 Communication with the Host Computer

Communication via communication unit (CU)
Data is transmitted from the BHT to the host computer via the communication unit (CU-1301, CU-1311
or CU-1321). Set the BHT in either of these CUs
For the CU-1301 or CU-1321, the BHT-BASIC 4.0 Development Pack (Option) and BHT-BASIC 4.0
Transfer Utility (Option) are required for serial communication between the CU and the host computer.
For the CU-1311, the File Transfer Protocol (FTP) is required for socket communication between the
CU and the host computer.
The CU-1301 and CU-1311 communicate with the BHT via Infrared.
The CU-1321 communicates with the BHT via USB.
Refer to Chapter 4.5.6 [5] “Setting the communication environment” for each communication setting.

USB communication unit
Connect the BHT to the host computer with the USB cable.
Requests

Use the USB cable that conforms to USB2.0 standard as follows (sold separately):
Between the BHT and the host computer: Type A-micro B connector
Between the CU-1321 and the host computer: Type A-B connector

Connect the BHT directly to the USB port on the host computer.

Communication may be deteriorated if the BHT is connected to the host computer by way of the hub.

Do not keep plugging and unplugging the USB cable repeatedly in a row. The host computer may be
locked.
CU-1301: RS232C
CU-1311: Ethernet
CU-1321: USB