Denon TU-201SA, Руководство по эксплуатации

Страница: 6 / 81

ENGLISH
6
1 2
CONNECTOR
SYSTEM
ANTENNA TERMINAL
AM FM
COAX.
LOOP ANT.
75
LINE OUT
L
R
SIGNAL
GND
1 2
SYSTEM
CONNECTOR
L
R
SPEAKER SYSTEM
SPEAKER IMPEDANCE
4 16
CD DVD/AUX
TUNER PHONO TAPE MD
AUX-2 TAPE MD
PB
REC
INPUTS
L
R
L
R
4 CONNECTIONS
2
When connecting to a pre-main amplifier other than the PMA-201SA, there is no need to make connection 2. Note that
in this case none of the system functions (auto power on, etc.) will work.
• System operations such as the auto power on function
can only be used if stereo audio cords and system cords
are connected between all the system components. Be
sure to securely connect all the connection cords
between all the units.
• Disconnecting a system cord during system operation
may result in malfunction. Be sure to unplug the power
cords before changing the connections.
• Install the components in such a way that the ventilation
holes of the pre-main amplifier (PMA-201SA) are not
obstructed.
• Be sure to plug the TU-201SA’s power cord into a wall
power outlet to which power is constantly supplied. The
TU-201SA’s clock and timer functions may not work if
the TU-201SA is plugged into the AC outlet of a
commercially available timer, etc.
Connecting to the 201SA Series …………………………………………… System Connections
PMA-201SA (Pre-main amplifier)
Plug into the open SYSTEM CONNECTOR jack of another
component. Any SYSTEM CONNECTOR jack is OK.
Power cord
(for U.K. model)
1
Connect the TU-201SA’s LINE OUT jacks to the
pre-main amplifier’s TUNER input jacks using
the included stereo audio cord.
2
Connect the TU-201SA’s SYSTEM CONNECTOR
jack (1 or 2) to the SYSTEM CONNECTOR jack (1
or 2) of one of the other components using the
included system cord.
3
Plug the power cord into a wall power outlet.
✽
The TU-201SA can also be used when connected to
a pre-main amplifier other than the PMA-201SA. In
this case, none of the system functions (auto power
on, etc.) will work.
NOTES:
• Do not plug power cords into power outlets until all connections have been completed.
• Check the left and right channels and be sure to interconnect them correctly (L to L, R to R).
• Plug in the power cords securely. Incomplete connections will result in noise.
• Clasping the power cords and connection cords together may result in humming or noise.
• After unplugging the power cord, wait at least 5 seconds before plugging it back in.
Recommended System Installation
• To ensure performance and stability, install the 201SA series as shown below.
• Do not place another component directly on top of the pre-main amplifier (PMA-201SA).
• For stability, do not stack more than three components on top of each other.
PHONES FUNCTION
VOLUME
SOURCE DIRECT MODE ™ ON / STANDBY ¡ OFF
INTEGRATED AMPLIFIER PMA-201SA
1 3 2
5 ON / STANDBY
C
8 / 6 7 / 9
TRACK INDEX TIME
M S
COMPACT DISC PLAYER DCD-201SA
TIMER ON / STANDBY BAND / RDS
PRESET / TUNING
MEMORY / SET
DOWN UP
CH MHz
TUNED STEREO AUTO
AM-FM STEREO TUNER TU-201SA
ON / STANDBY
1 3 2
5 CD SRS INPUT
MEMO REC /
CHARACTER EDIT
MULTI REC
REC LEVEL / ENTER
8 9
+
MINIDISC RECORDER DMD-201SA
POWER LOADING MECHANISM
ON / STANDBY
1 2
5
-60 -40 -30 -20 -12 -6 -2 0
L
dB
R
3
DOLBY NR B
DOLBY
NR
REVERSE
/ RESET CD SRS
REC LEVEL / 0 1
8
6
9
7
+
STEREO CASSETTE TAPE DECK DRR-201SA
4 REC
/ REC MUTE
(PMA-201SA)
(DMD-201SA)
(DCD-201SA)
3
,
Power cord
(for U.K. model)
Power plug
AC 230 V, 50 Hz
(Plug into a power outlet)
TU-201SA (Tuner)
(TU-201SA)
(DRR-201SA)
Power plug
AC 230 V, 50 Hz
(Plug into a power
outlet)
1
2