ENGLISH
10
(News)
(Varied)
(Affairs)
(Information)
(Sport)
(Education)
(Drama)
(Culture)
(Pop Music)
(Rock Music)
(Easy Listening)
(Light Classics)
(Serious Classics)
(Other Music)
(Science)
Programs
TP Search
9
Press the RDS button 3 times on
the remote control unit.
11
The station is tuned in.
Once the station is tuned in, ”TP“ and ”RDS“
light and program service name is displayed.
“TP” and “RDS” light after 5 seconds of flashing.
NOTE:
”
NO PROG
“ is displayed when there is
traffic information broadcast station.
10
Press the PRESET/TUNING
UP or DOWN button.
PRESET / TUNING
DOWN
UP
RT (Radio Text)
12
To turn the RT mode on, press the
PANEL button on the remote control
unit until the RT indicator is lit. (Refer
to page 13)
When the station currently tuned in is
offering a radio text message service,
the message scrolls on the display.
TIME/
PANEL
• When the RT mode is turned on while an RDS radio
station not offering an RT service is tuned in, ”
NO
TEXT
“ flashes on the display, then the mode
automatically switches to the PS mode.
• In the same way, the mode automatically switches to
the PS mode when the RT service is finished. In this
case, the mode automatically switches from the PS
mode back to the RT mode when an RT broadcast is
resumed.
• The RT mode cannot be set in the AM band or FM
stations not offering RDS broadcasts.
• To turn the RT mode off, press the PANEL button and
switch to the desired display mode.
7 USING THE TIMER
(1) Setting the Current Time (24-hour display)
Example: Setting the current time to 19:30
1
Turn on the power.
2
Press the TIMER button for at least
3 seconds.
• “TIME” is displayed.
✽
If the time is already set,
“EVERYDAY” is displayed.
Press one of the PRESET/TUNING
buttons to display “TIME”, then
perform step 3.
7
Press the MEMORY/SET button
at the sound of the chime of a
time service, etc.
• “30” stops flashing, remaining
lit, and the current time is
displayed.
✽
The number changes continuously when one of the
tuning buttons (TUNING UP or DOWN) is pressed.
✽
If the time is already set when step 2 is performed,
both the hours and minutes positions flash.
MEMORY / SET
TIMER
ON / STANDBY
BAND / RDS
PRESET / TUNING
MEMORY / SET
DOWN
UP
CH
MHz
TUNED
STEREO
AUTO
AM-FM STEREO TUNER TU-201SA
1
2
3,5,7
4,6
ON / STANDBY
TIMER
5
Press the MEMORY/SET button.
• “19” stops flashing, remaining
lit, and the minutes position
starts flashing.
MEMORY / SET
Use the PRESET/TUNING
buttons to input the
minutes (30).
• “30” flashes in the
minutes position.
6
PRESET / TUNING
DOWN
UP
(This operation is only possible from the remote
control unit RC-906)
3
Press the MEMORY/SET button.
• The hours position flashes.
MEMORY / SET
Use the PRESET/TUNING
buttons to input the hours
(19).
• “19” flashes in the hours
position.
4
PRESET / TUNING
DOWN
UP
(2) Before Setting the Timer
2
Be sure to set the current time. If the current time is not set, the timer standby indicator (“
”) will not light and the
timer will not function.
2
Be sure to preset the station before setting the timer. (Refer to “Presetting AM and FM stations” on page 8.)
2
The TU-201SA is equipped with two types of timers: the everyday time which turns the power on and off at the
same times every day, and the once timer that turns the power on and off only once.
2
Do not change the timer standby mode after the timer is activated (after the timer on time is reached). The timer may
not operate properly.
2
It is not possible to set the timer start and end times to the same time.
2
If the display or operation is not normal, unplug the power cord, then plug it back in while pressing the memory/set
button (MEMORY/SET). This restores the tuner to the initial default values. After doing this, reset the presettings,
current time and timer settings.
2
When setting the timer to operate the CD player or cassette deck, do so with a disc or cassette loaded and the disc
holder or cassette holder closed. The timer will not operate properly if no disc or cassette is loaded or if the disc
holder or cassette holder is open.
BAND/RDS
RDS
Press the BAND/RDS button for at
least 3 seconds.
The press the BAND/RDS button
twice.
TUNING
Press the TUNING
•
or
ª
button on the remote
control unit.
(Weather & Meteorological)
(Jazz Music)
(Finance)
(Children's Progs)
(Social Affairs)
(Religion)
(Phone In)
(Travel & Touring)
(Country Music)
(National Music)
(Oldies Music)
(Folk Music)
(Documentary)
(Leisure & Hobby)
Flashes
Flashes
NOTE:
The PANEL function can only be operated with the
remote control unit (RC-906) included with the pre-
main amplifier (PMA-201SA) when connected in a
system with the pre-main amplifier (PMA-201SA).
(Refer to “System Remote Control” on page 13.)
