ENGLISH
RC-906
REMOTE CONTROL UNIT
CLEAR
1
2
3
5
4
6
7
8
9
10
+10
CD SRS
MD
TAPE
CD-R
TUNING
REV.
MODE
Dolby NR
REPEAT
CALL
PROG /
DIRECT
RANDOM
BAND
RDS
DIMMER
TIME/
PANEL
TIME EDIT
SYSTEM
POWER
OFF
ON
STOP
PLAY
VOLUME
/SELECT
SLEEP
MODE
TAPE
FUNCTION
PRESET
+
-
TUNER
CD
CD-R
MD
TAPE
13
2
Names of remote control unit buttons (tuner section)
Press this button to switch the
system power standby mode.
Power standby button
(SYSTEM POWER STANDBY)
Press this button to switch the
system power on mode.
Power on button
(SYSTEM POWER ON)
Use this to select the function to
be operated with the system
remote control unit. Set the
switch to “TUNER” to operate
the TU-201SA.
Function select switch
PANEL button (PANEL)
✽
The buttons above for which there are no explanations cannot be operated with the TU-201SA.
Press this button to set the sleep
timer
SLEEP button (SLEEP)
Use these buttons to recall preset
stations on the tuner.
Press this button after selecting
“PTY” with RDS button to select
one of the 29 program types.
PRESET button (PRESET)
Use this button to selecting the
band.
BAND button (BAND)
FM AUTO
FM MONO
AM
Use these buttons to selecting
the station.
TUNING button (
•
,
ª
)
RDS button (RDS)
Press these buttons to recall
preset station.
Examples:
To call the station at preset
number 12:
Press ,
To call the station at preset
number 29:
Press ,
,
9
+10
+10
2
+10
Number buttons
8 SYSTEM FUNCTIONS
2
Operation is even easier when the components in the
201SA series are connected to the TU-201SA with
system connections. (For instructions on connections,
refer to “CONNECTIONS” on page 6.)
2
The system functions will only work when the
components of the 201SA series are connected. They
will not work with other components. To use the
system functions, connect the pre-main amplifier
(PMA-201SA).
(1) System Remote Control
2
When system connections are made, all the remote
control signals are received at the PMA-201SA’s
remote sensor.
2
When the TU-201SA is used in a system with the
201SA series, it can be operated with the system
remote control unit (RC-906) included with the pre-
main amplifier (PMA-201SA).
RDS button
Use this button to automatically tune to stations using
the radio data system.
PANEL button
This button is used to select the panel mode.
Press this button when receiving RDS stations to
select the frequency, PS, PTY, RT or CT display.
The display mode changes as follows each time the
button pressed.
✽
Press the PRESET
<
or
>
button after selecting
“PTY” with the RDS button to select one of the 29
program type.
RDS
PTY
TP
PS
PTY
RT
Frequency
CT
CT display
Use this to correct the time of the clock on the TU-
201SA. Press the PANEL button when the time
service of an RDS station is being properly received.
“CT” and “TIME” are displayed and the TU-201SA’s
clock is corrected. “NO CT” is displayed if the RDS
station does not offer a time service and when the
broadcast is not being received properly.
Note that this button will not function if the reception
is poor.
✽
