38
ENGLISH
1
In the play or pause mode, press the ZOOM button.
• The zoom rate increases each time the ZOOM button is
pressed.
For DVD video discs and video CDs:
OFF
Æ
x1.5
Æ
x2
Æ
x4
Æ
OFF
For DVD audio discs:
OFF
Æ
x2
Æ
x4
Æ
OFF
• When “PLAYER MODE” at “OTHER SETTING” in
“SETUP” is set to “AUDIO”, zooming is not possible
at the top menu or with still pictures.
• When “PLAYER MODE” at “OTHER SETTING” in
“SETUP” is set to “VIDEO”, zooming is not possible at
the top menu.
ENTER
7
0
8
+10
9
TOP MENU
DISPLAY
MARKER
RANDOM
PAGE
A-B
ZOOM
DIMMER
PIC.ADJ
REPEAT
SETUP
CALL
RETURN
SKIP
SLOW / SEARCH
ANGLE
SUBTITLE
AUDIO SEARCH MODE
PLAY
STILL /
PAUSE
STOP
SRS.TS
RC-962
T. MENU
DISP.
MENU
1
2
22
PLAYING IN THE ZOOM MODE
2
Use the cursor buttons (
ª
,
•
,
0
and
1
) to move the zoomed
picture.
ZOOM
Remote control unit
Remote control unit
NOTES:
• Zooming is not possible with some discs.
• The zoom function may not work properly at some scenes.
• Zooming is not possible at the top menu or the menu screen.
• When the picture is enlarged, the picture quality may be decreased and the picture may be blurred.
23
TROUBLESHOOTING
Check again before assuming the player is malfunctioning
2
Are all the connections correct ?
2
Are you following the instructions in the manual ?
2
Are the amplifier and speakers operating properly ?
If the DVD-A11 does not seem to be functioning properly, check the table below. If this does not solve the
problem, the DVD-A11 may be damaged. Turn off the power, unplug the power supply cord from the power
outlet, and contact your store of purchase or nearest DENON sales office.
Symptom
Power does not turn on.
Playback does not start
when PLAY button is
pressed.
Playback stops immediately.
Picture does not appear.
Sound is not produced or
sound quality is poor.
Menu playback of video
CD’s is not possible.
Picture is disturbed during
the search operation.
Buttons do not operate.
No subtitles are displayed.
Audio (or subtitle) language
does not switch.
Angle does not switch.
Playback does not start
when the title is selected.
The password for rating
level has been forgotten.
Reset all the setting to
Factory Preset.
The disc is not played with
the audio or subtitle
language set as the default
setting.
Picture is not displayed in
4:3 (or 16:9).
Menu screen messages for
the desired language do not
display.
Remote control unit does
not operate.
Check
Page
• Plug the power supply cord securely into the power outlet.
• Is there condensation on the disc or player ? (Let stand for 1 or 2 hours.)
• Discs other than DVDs,SuperAudio CDs, video CDs and music CDs cannot be
played.
• Disc is dirty. Wipe off the dirt.
• Check the connections.
• Check that VIDEO OUT has not been set to “VIDEO OFF” or “ALL OFF” for PURE
DIRECT MODE.
• Set the TV’s input to “video”.
• When the DVI connector output the signals, no progressive signals from the
component video connector.
If you wish to use the component video output, set to “DVI OFF” for DVI SETUP.
• Check the connections.
• Properly set the input of the TV, stereo, etc.
• Check the “DIGITAL OUT” and “COMPRESSION” settings.
• Digital signals cannot be output with Super audio CDs. Use analog connections.
• Area/layer of Super audio CD being played (CD/stereo/multi-channel) does not match
amplifier connections.
• Menu playback is not possible with anything but video CDs with playback control.
• Some disturbance is normal.
• Some operations are disabled for some discs.
• Subtitles are not displayed for DVDs not containing subtitles.
• Subtitles are turned off. Turn the subtitles setting on.
• The audio (or subtitle) language does not switch for discs which do not include
multiple audio (or subtitle) languages.
• For some discs the audio (or subtitle) language cannot be switched when the
operation to switch it is performed, but can be switched on the menu screens.
• The angle cannot be switched for DVDs which do not contain multiple angles. In
some cases multiple angles are only recorded for specific scenes.
• Check the “RATINGS” setting.
• While the player is in the stop mode, hold the player's SKIP
9
button and the
PLAY button down simultaneously and then hold the OPEN/CLOSE button down for
longer than 3 seconds (until “INITIALIZE” disappears from the TV monitor).
The lock will be released and all default settings and picture settings will return to
the default values.
• The disc does not play with the selected audio or subtitle language if that audio or
subtitle language is not included on that DVD.
• Set the “TV ASPECT” default setting to the proper setting for the connected TV.
• Check the default setting for the disc language’s menu language.
• Check that the batteries are inserted in the proper “
<
” and “
>
” directions.
• The batteries are dead. Replace them with new batteries.
• Point the remote control unit at the remote control sensor when operating it.
• Operate the remote control unit within a distance of 7 meters from the remote
control sensor.
• Remove the obstacle between the remote control unit and remote control sensor.
6~12
—
5
6
6~11
26, 27
—
26, 27
6~11
—
19, 20, 23
8, 9
8, 9,
19, 20
24
—
24
—
15
—
36
35
19
—
15~17
18
15, 16
13
13
13
13
13
