Lights when the audio signals can be down-mixed.
12
ENGLISH
• PURE DIRECT (AUDIO) MODE:
The circuits not being used (output signals)
can be turned off.
NORMAL:
This turns the PURE DIRECT mode off. All
signals are output.
VIDEO OFF:
This turns the video output off. Use this when
only using audio signals.
DIGITAL OFF:
This turns the digital output off.
ALL OFF:
This turns the digital output, display and video
output off.
• DVI (VIDEO output) SETUP MODE:
Use this to set the DVI connector’s video
signal output.
DVI OFF:
No signal from the DVI-D connector.
480P:
480P video signals are output from the DVI-D
connector.
720P:
720P video signals are output from the DVI-D
connector.
1080i:
1080i video signals are output from the DVI-D
connector.
✽
When the DVI-D connector output the
signals, no programme signals from the
component video connector.
• DVI BK (Black) LEVEL:
This switches the digital RGB video level (data
range) of the DVI-D terminal.
NORMAL:
Video level (data range): 16 (black) to 235
(white)
ENHANCED:
Video level (data range): 0 (black) to 246
(white)
✽
When the DVI-D terminal is connected,
the black may seem to stand out,
depending on the TV or Monitor you are
using. In this case, set this to
“ENHANCED”.
(2) Rear Panel
@1
DVI-D-Video output connector
(DVI-D OUT)
• Connect using DVI-D connection cord
(available in stores).
@2
Component video output connectors
(COMPONENT VIDEO OUT)
• Connect using video cords (available in
stores).
@3
S-Video output connector
(S-VIDEO OUT)
• Connect using an S-Video connection cord
(available in stores).
@4
Video output connector (VIDEO OUT)
• Connect using the included video cord.
@5
Digital output connector (IEEE 1394)
• This is for connection of a separately sold AV
amplifier equipped with a IEEE 1394
connector.
• Use it to achieve high quality digital sound
with low data loss.
@6
Digital output connector
(DENON LINK)
• This is for connection of a separately sold AV
amplifier equipped with a Denon Link
connector.
• Use it to achieve high quality digital sound
with low data loss.
@7
Digital audio output connector
(OPTICAL)
• Connect using an optical fiber cable (available
in stores).
• Digital data is output from this connector.
@8
Digital audio output connector
(COAXIAL)
• Connect using an digital audio cord. Connect a
commercially available 75
Ω
/ohms pin-plug
cord.
• Digital data is output from this connector.
@9
Control connector (RS-232C)
• This is a terminal for future system expansion.
#0
Control input connector
(ROOM TO ROOM/IN)
• This is the input connector for wired remote
control.
Consult your DENON dealer if you wish to use
this connector.
#1
Control output connector
(ROOM TO ROOM/OUT)
• This is the output connector for wired remote
control.
Consult your DENON dealer if you wish to use
this connector.
#2
Audio output connectors
(AUDIO OUT)
• Connect using the included audio cord.
#3
21-pin SCART terminal (AV1/AV2)
(For only European model)
• Connect using a 21-pin SCART cable (available
in stores).
#4
Power input (AC IN)
• Connect to AC power supply using the
included power supply cord.
(3) Display
Lights during playback of multiple angles disc.
Lights to indicate the currently playing disc.
These light to indicate the names of the sections of the disc
being played.
Lights to indicate the currently playing audio format.
Lights to indicate the currently playing
audio channel.
L:
Front left channel
C:
Center channel
R:
Front right channel
SL:
Surround left channel
S:
Mono surround channel
SR: Surround right channel
LFE: Low frequency effect
Lights to indicate the
currently playing video
type.
F: Film source
V: Video source
Lights during playback, flashes when the resume play memory function is activated.
Lights in the programmed play mode.
Lights in the still/pause mode.
Displays the title, track number
and elapsed time during
playback.
These light to indicate
the time display mode.
Lights when progressive video
signals are being output.
Lights in the repeat play mode.
Lights in the random play mode.
