ENGLISH
12
2
The timer functions of the tuner (TU-201SA) can be used to play cassette tapes or record radio programs (“Air
Check”) at set times.
• Refer to the operating instruction included with the TU-201SA.
(5) Timer functions (when connected to the PMA-201SA and TU-201SA)
5
5
2
Use this function to automatically edit the tracks on the CD to fit on the tape to be used for recording.
2
The editing function is set from system remote control unit (RC-906) included with the pre-main amplifier (PMA-
201SA).
1
2
3
4
Turn on the power of the pre-main amplifier.
• The system‘s power turns on.
Load the cassette tape onto which
you want to record into the DRR-
201SA’s cassette holder.
Load the CD in the DCD-201SA.
Now operate as described in the “Editing
Function” section of the operating instructions
included with the CD player (DCD-201SA).
(6) Editing functions (when connected to the PMA-201SA and DCD-
201SA)
(Main unit)
(Main unit)
PHONES
FUNCTION
VOLUME
SOURCE DIRECT
MODE
™
ON / STANDBY
¡
OFF
INTEGRATED AMPLIFIER PMA-201SA
1
ON / STANDBY
1
2
5
-60 -40 -30 -20 -12 -6 -2 0
L
dB
R
3
DOLBY NR B
DOLBY
NR
REVERSE
/ RESET
CD SRS
REC LEVEL /
0 1
8
6
9
7
+
STEREO CASSETTE TAPE DECK DRR-201SA
4
REC
/ REC MUTE
2
2
1 3
2
5
ON / STANDBY
C
8
/
6
7
/
9
TRACK
INDEX
TIME
M
S
COMPACT DISC PLAYER DCD-201SA
3
3
PMA-201SA (pre-main amplifier)
DRR-201SA (this unit)
DCD-201SA (CD player)
CLEAR
1
2
3
5
4
6
7
8
9
+10
10
CD SRS
MD
TAPE
CD-R
REV.
MODE
Dolby NR
REPEAT
CALL
PROG /
DIRECT
RANDOM
DIMMER
TIME/
PANEL
TIME EDIT
SYSTEM
POWER
OFF
ON
1
RC-906 (system remote control unit)
(PMA-201SA)
(System remote control unit)
™
ON / STANDBY
¡
OFF
SYSTEM
POWER
ON
NOTES:
• The editing function will not work with discs containing more than 21 tracks.
• Load the cassette tape onto which you want to record into the cassette deck‘s cassette tray with side A facing up
before starting edited recording. The beginning of the tape is automatically found before recording starts.
• When using a recorded cassette tape for edited recording, recording stops and a blank section is left on side B of
the tape if the tape is longer than the set time, so erase the tape beforehand.
• When the editing function is used for recording, the reverse mode is automatically set to
even if the cassette
deck‘s reverse mode switch is set to
, and recording continues on side B after
recording on side A is completed.
• In some cases it may not be possible to record all the tracks on the disc, even if the tape is longer than the disc‘s
recorded time (because of how the tracks are divided onto sides A and B of the tape). The “OVER” indicator on
the CD player flashes if there are tracks that cannot be recorded.
• The jog dial (
7
/
9
and
8
/
6
), recording/recording mute button (
4
REC/REC MUTE) and reverse mode
selector button (REVERSE MODE) stop button (
2
) will not function during editing.
• When recording using the editing function, the CD player‘s auto space function is activated and blank spaces of
approximately 4 seconds are automatically created between tracks. Because of this, when recording CDs
containing for example recordings of concerts without spaces between tracks, blank spaces will be created in the
middle of the piece. In this case, do not record using the editing function.
• To cancel the editing mode, press the stop button (
2
) on the DRR-201SA or the CD player to stop playback of the
CD. The editing mode is not canceled if other buttons are pressed.
