73
4
Display the surround parameter menu.
(Main unit)
(Remote control unit)
5
Select the various parameters.
6
(Main unit)
(Remote control unit)
SELECT
(Main unit)
(Remote control unit)
Adjust the parameter settings.
NOTE:
• When “Default” is selected and the cursor left button is pressed, “CINEMA EQ.” and “D.COMP.” are automatically turned off, “LFE” is
reset, and the tone is set to the default value.
NOTE:
The display on the screen differs depending on
whether you are performing the operation from the
main unit or the remote control unit.
2
Dialogue Normalization
The dialogue normalization function is activated automatically when playing Dolby Digital program sources.
Dialogue normalization is a basic function of Dolby Digital which automatically normalizes the dialog level (standard level) of the signals which are
recorded at different levels for different program sources, such as DVD, DTV and other future formats that will use Dolby Digital.
These contents can be verified with the STATUS and ON SCREEN button.
The number indicates the normalization level when the currently playing program is normalized to the
standard level.
Display
Checking the input signal
The input signal can be checked by pressing the remote control unit’s ON
SCREEN button.
SIGNAL:
Displays the type of signal (DTS, DOLBY DIGITAL, PCM, etc.).
fs:
Displays the input signal’s sampling frequency.
FORMAT: Displays the input signal’s number of channels.
“Number of front channels/Number of surround channels/LFE on/off”
“SURROUND” is displayed for 2-channel signal sources recorded in Dolby Surround.
OFFSET:
Displays the dialog normalization offset value.
FLAG:
Displays the special identification signal recorded in the input signal.
“MATRIX” is displayed when matrix processing is conducted on the surround back
channel, “DISCRETE” is displayed when discrete processing is conducted.
Not displayed when no identification signal is recorded.
In addition, screen information is displayed in the following order when the ON SCREEN button is
pressed repeatedly:
OSD-1
Input signal
OSD-2
Input/output
OSD-3
Auto surround mode
OSD-3 ~ 9 Tuner preset stations
NOTE:
OSD-3:
This is displayed when the auto surround mode is set to “ON” and the input mode is set to “Auto”.
It is not displayed when the input mode is set to “Analog” or “EXT. IN”.
(Remote control unit)
O f f s e t - 4 d B
D i a l . N o r m
3
Play a program source with the
,
mark.
• The DTS indicator lights when playing DTS
sources.
Light
Light
• The Dolby Digital indicator lights when playing
Dolby Digital sources.
• Press the SURROUND BACK button.
Lights when the Surround Back CH is on.
Light
(Remote control unit)
(Main unit)
Light
