44
4
Enter the setting.
The Option Setup Menu reappears.
3
Select the desired setting.
Variable:
The level can be adjusted freely using the buttons on the remote
control unit.
0 dB, -40 dB:
The output level is fixed at the set level and the volume can no
longer be adjusted.
NOTE:
• When “ZONE2” is selected at System Setup Menu “5-
1.Power Amp Assign”, the Zone2 vol. Level is all set to
“Variable” including preout level and this menu is not
displayed.
V a r i a b l e
* Z o n e 2 V o l . L e v .
(Remote control unit)
(Remote control unit)
5-3, 5-4
Setting the Trigger Out Setup
• Set the Trigger Out output 1 for the different input sources.
1
2
3
Select “Trigger Out 1 Setup” at the Option Setup
Menu.
Display to the Trigger Out 1 Setup screen.
Select the Zone (MAIN or Zone2).
T r i g g e r O u t 1
* O p t i o n S e t u p
(Remote control unit)
Z O N E : M A I N
* T r i g g e r O u t 1
(Remote control unit)
(Remote control unit)
4
(Remote control unit)
(Remote control unit)
5
(Remote control unit)
Enter the setting
The Option Setup Menu reappears.
Set the Trigger out 2 Setup in the same way.
w
Select “ON” or “OFF”.
q
Select the input source.
