Denon AVR-2308 Скачать руководство пользователя страница 28

Страница: 28 / 80

Get
ting Star

ted

Connections

Pla
ybac

k
Remot

e Contr

Multi-Zone

Inf
or

mation

oubleshooting

ENGLISH

Error Messages

If the auto setup procedure could not be completed due to speaker installation, the measuring environment, etc., an error message is
displayed. If this happens, check the relevant items, be sure to take the necessary measures, then perform the auto setup procedure over
again.

NOTE

Be sure to turn the power off before checking the speaker connections.

Room EQ

Select room EQ setting method.

[Selectable items]

All

: Apply settings to all surround modes.

Assign

: Make settings for each surround mode separately.

Option

Select settings for room EQ, mic, etc.

Select “Retry” to make the measurements again.

Direct Mode Setup

Select room EQ use for DIRECT or PURE DIRECT mode.

[Selectable items]

: Use room EQ.

OFF

: Do not use room EQ.

Parameter Check

Check auto setup measurement results.
This is displayed after the auto setup procedure is completed.

The auto setup results can be set again when “Restore” is selected.

Error messages (examples)

Cause

Measures

Retry

Cancel

Microphone:None

Speaker :None

Auto Setup

Caution!

• Included setup microphone is not connected.

• Not all speakers could be detected.

• Connect the included setup microphone to the

SETUP

MIC

jack on the main unit.

• Check the speaker connections.

too high or

Retry

Cancel

Ambient noise is

Level is too low.

Auto Setup

Caution!

• Too much noise in the room for accurate

measurements to be made.

• Speaker or subwoofer sound is too low for

accurate measurements to be made.

• Either turn off any device generating noise or move it

away.

• Try again when the surroundings are quiet.
• Check the speaker installation and the direction in which

the speakers are facing.

• Adjust the subwoofer’s volume.

Retry

R :None

Cancel

Skip

Front

Auto Setup

Caution!

• Displayed speaker could not be detected.

· The front L and front R speakers were not

properly detected.

· Only one channel of the surround speakers

was detected.

· Sound was output from the R channel

when only one surround back speaker was
connected.

· The surround back, but the surround speaker

was not detected.

• Check the connections of the displayed speaker.

Retry

L :Phase

Cancel

Skip

Front

Auto Setup

Caution!

• Displayed speaker connected with the polarities

reversed.

• Check the polarities of the displayed speaker.
• For some speakers, this error message may be displayed

even if the speaker is properly connected. In this case,
select “Skip”.

[Selectable items]

Speaker Config. Check

Distance Check

Channel Level Check

Crossover Freq. Check

EQ Check

Set
up

Содержание AVR-2308

















































































Результаты поиска

Содержание AVR-2308

Отзывы:

Похожие инструкции для AVR-2308

Бренды по названию

Популярные бренды

Denon AVR-2308, Руководство пользователя

Результаты поиска

Содержание AVR-2308

Отзывы:

Похожие инструкции для AVR-2308

Бренды по названию

Популярные бренды