Denon AVR-2113, Руководство пользователя

Страница: 28 / 156

25
Preparation (Continued) Detection & Measurement (Main)
Set up speakers (Audyssey® Setup)
5
Select “Start” and then press
ENTER
.
The subwoofer volume setting screen
is displayed.
Connect the calibration microphone to the SETUP MIC input
on the front the AV receiver.
Audyssey Setup
Back Next
6
Select “Next” and then press
ENTER
.
Audyssey Setup
Back Next
VOLUME
MIN MAX
If your subwoofer has a volume control on it, please set it
at 50%...
NOTE
If “Caution!” is displayed on TV screen:
Go to “Error messages” ( v page 28 ). Check any related items,
and perform the necessary procedures.
If the problem is resolved, return and restart “Audyssey® Setup”.
Going back to the previous screen
Select “Back” and then press
ENTER
.
When measuring has stopped
q
Press
BACK
to display the popup screen.
w
Press
o
to select “Yes”, and then press
ENTER
.
Setting up the speakers again
Repeat the operation from step 4.
• This step automatically checks the speaker configuration and speaker
size, and calculates the channel level, distance, and crossover
frequency.
It also corrects distortion in the listening area.
7
Select “Begin Test” and then press
ENTER
.
When measuring begins, a test tone is output from each
speaker.
• Measurement requires several minutes.
8
The detected speakers are displayed.
• The illustration below shows an example of when the front
speakers, center speaker, subwoofer and surround speakers have
been detected.
Speaker Detection
Front
Center
Subwoofer
Surround
Surround Back :Yes
:Yes
:Yes
:Yes
:2spkrs
Audyssey Setup
Repeat Last Test Next
NOTE
If a connected speaker is not displayed, the speaker may not be
connected correctly. Check the speaker connection.
9
Select “Next” and then press ENTER .
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mations
Basic v
ersion
v See overleaf
DVD