background image

103

Audio

Audio Delay

Default settings are underlined.

While viewing video, manually adjust the time to delay audio output.

Setting details

0ms – 200ms

• This item can be set within the range of 0 to 100 ms when “Auto Lip Sync” (

v

page 106

) is set to 

“On” and when a TV compatible with Auto Lip Sync is connected.

• Store “Audio Delay” for each input source.
• Audio Delay for game mode can be set when “Video Mode” (

v

page  107

) is set to “Auto” or 

“Game”.

Volume

Default settings are underlined.

Set the MAIN ZONE (room where the unit is located) volume setting.

Setting items

Setting details

Scale

Set how volume is 
displayed.

0 – 98

 : Display in the range 0 (Min) to 98.

–79.5dB – 18.0dB

 : Display ---dB (Min), in the range –79.5 dB to 18.0 dB.

• The “Scale” setting is applied also to the “Limit” and “Power On Level” 

display method.

• The “Scale” setting applies to all zones.

Limit

Make a setting for 
maximum volume.

Off

 : Do not set a maximum volume.

60 (–20dB)

 / 

70 (–10dB)

 / 

80 (0dB)

Power On Level

Define the volume setting 
that is active when the 
power is turned on.

Last

 : Use the memorized setting from the last session.

Mute

 : Always use the muting on condition when power is turned on.

1 – 98 (–79dB – 18dB)

 : The volume is adjusted to the set level.

Mute Level

Set the amount of 
attenuation when muting 
is on.

Full

 : The sound is muted entirely.

–40dB

 : The sound is attenuated by 40 dB down.

–20dB

 : The sound is attenuated by 20 dB down.

Audyssey

Default settings are underlined.

Set Audyssey MultEQ® XT, Audyssey Dynamic EQ® and Audyssey Dynamic Volume®. These can be 
selected after Audyssey® Setup has been performed. For additional information on Audyssey technology, 
please see 

page 141

.

NOTE

• If you have not performed Audyssey® Setup, or if you change the speaker settings after performing 

Audyssey® Setup, you may not be able to select Dynamic EQ/Dynamic Volume.
In this case, either perform Audyssey® Setup over again or perform “Restore...” (

v

page  29

) to 

return to the settings after Audyssey® Setup was run.

• When HD Audio for which the sampling frequency exceeds 96 kHz is played back, the “Audyssey” 

cannot be set.

Setting items

Setting details

MultEQ®XT

MultEQ® XT compensates 
for both time and 
frequency characteristics 
of the listening area based 
on Audyssey® Setup 
measurement results. 
Selection is done from three 
types of compensation 
curves. We recommend the 
“Audyssey” setting.
MultEQ® XT is the 
prerequisite function for 
Dynamic EQ and Dynamic 
Volume.

Audyssey

 : Optimize the frequency response of all speakers.

Audyssey Byp.L/R

 : Optimize frequency response of speakers except 

front L and R speakers.

Audyssey Flat

 : Optimize frequency response of all speakers to flat 

response.

Graphic EQ

 : Apply frequency response set with “Graphic EQ” 

(

v

page 104

).

Off

 : Turn “MultEQ® XT” equalizer off.

• “Audyssey”, “Audyssey Byp.  L/R” and “Audyssey Flat” can be 

selected after Audyssey® Setup has been performed. “Audyssey” 
is automatically selected after performing Audyssey® Setup. When 
“Audyssey”, “Audyssey Byp.  L/R” or “Audyssey Flat” is selected, 

 illuminates.

• After running Audyssey® Setup, if the Speaker Configuration, Distance, 

Channel Level, and Crossover Frequency have changed without 
increasing the number of speakers measured, only 

 illuminates.

NOTE

When using headphones, “MultEQ® XT” is automatically set to “Off”.

“MultEQ® XT”, “Dynamic EQ” and “Dynamic Volume” settings are stored for each input source.

Basic v

ersion

A

dv

anced v

ersion

Inf
or

mations

A

dv

anced v

ersion

 

v

 See overleaf

DVD

Содержание AVR-2113





























































































































































Отзывы: