Denon AVR-1713 Скачать руководство пользователя

Страница: 128 / 156

125

Symptom

Cause/Solution

Page

Sound quality is poor
or noise is heard
during play.

• File being played has a low bit rate. This is not a malfunction.

–

Cannot login to
Pandora. (“Email
address” or
“Password” is
displayed.)

• Login information is incorrect. Check if the “Email address” for

Pandora has been properly entered. Re-enter the “Password”.
(Password is not displayed.)
http://www.pandora.com/denon

AirPlay

Symptom

Cause/Solution

Page

The AirPlay icon

is not displayed

in iTunes or on the
iPhone/iPod touch/
iPad.

• This unit and the computer or iPhone/iPod touch/iPad are not

connected to the same network (LAN). Connect the computer or
iPhone/iPod touch/iPad to the same network as this unit.

• iTunes or the iPhone/iPod touch/iPad do not have firmware that

supports AirPlay installed. Update to the latest firmware.

107

No sound.

• The volume in iTunes or on the iPhone/iPod touch/iPad is set to

the minimum setting. Adjust the volume to the optimum level.

• This unit is not selected in the screen that is displayed when

iTunes or the iPhone/iPod touch/iPad is started. Start iTunes or
switch on the iPhone/iPod touch/iPad, click the AirPlay icon

the displayed screen, and select this unit.

• AirPlay playback has not started. Click the

button in iTunes or

press the

button on the iPhone/iPod touch/iPod.

–

When using AirPlay
with the iPhone/
iPod touch/iPad, the
sound suffers from
intermittent breaks
or AirPlay does not
function.

• Quit the application running in the background of the iPhone/iPod

touch/iPad, and then play using AirPlay.

• When playing via a wireless connection, outside conditions may

affect the unit. To remedy this, change the network environment,
e.g. shorten the distance to the wireless LAN access point.

• Update the iPhone/iPod touch/iPad application or iTunes to the

latest version.

–

Remote control unit

Symptom

Cause/Solution

Page

The set cannot be
operated with the
remote control unit.

• Batteries are worn out. Replace with new batteries.
• Operate the remote control unit within a distance of about

23 ft/7 m from this unit and at an angle of within 30°.

• Remove any obstacle between this unit and the remote control

unit.

• Insert the batteries in the proper direction, checking the

and

marks.

• The set’s remote control sensor is exposed to strong light (direct

sunlight, inverter type fluorescent bulb light, etc.). Move the set
to a place in which the remote control sensor will not be exposed
to strong light.

114
114

114

Basic v

ersion

anced v

ersion

Inf
or

mation

Inf
or

mation

Содержание AVR-1713





























































































































































Результаты поиска

Содержание AVR-1713

Отзывы:

Похожие инструкции для AVR-1713

Бренды по названию

Популярные бренды

Denon AVR-1713, Руководство пользователя

Результаты поиска

Содержание AVR-1713

Отзывы:

Похожие инструкции для AVR-1713

Бренды по названию

Популярные бренды