Denon AVR-1713, Руководство пользователя

Страница: 89 / 156

86
Audio Delay
Default settings are underlined.
While viewing video, manually adjust the time to delay audio output.
Setting details
0ms – 200ms
• This item can be set within the range of 0 to 100 ms when “Auto Lip Sync” ( v page 90 ) is set to
“On” and when a TV compatible with Auto Lip Sync is connected.
• Store “Audio Delay” for each input source.
Volume
Default settings are underlined.
Set the volume setting.
Setting items Setting details
Scale
Set how volume is
displayed.
0 – 98
: Display in the range 0.5 (Min) to 98.
–79.5dB – 18.0dB
: Display ---dB (Min), in the range –79.5 dB to 18.0 dB.
The “Scale” setting is applied also to the “Limit” and “Power On
Level” display method.
Limit
Make a setting for
maximum volume.
Off : Do not set a maximum volume.
60 (–20dB) / 70 (–10dB) / 80 (0dB)
Power On Level
Define the volume setting
that is active when the
power is turned on.
Last
: Use the memorized setting from the last session.
Mute
: Always use the muting on condition when power is turned on.
1 – 98 (–79dB – 18dB)
: The volume is adjusted to the set level.
Mute Level
Set the amount of
attenuation when muting
is on.
Full
: The sound is muted entirely.
–40dB
: The sound is attenuated by 40 dB down.
–20dB
: The sound is attenuated by 20 dB down.
Audio
Subwoofer Level
Default settings are underlined.
Sets the subwoofer on/off and its output level.
Setting items Setting details
Subwoofer
Turn subwoofer output on
and off.
On : The subwoofer is used.
Off : The subwoofer is not used.
NOTE
This can be set when the sound mode is “DIRECT” ( v page 64 ) and
the “Subwoofer Mode” ( v page 97 ) is “LFE+Main”.
Subwoofer Level
Set the subwoofer output
level.
–12dB – +12dB (0dB)
Restorer
Compressed audio formats such as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce the
amount of data by eliminating signal components that are hard for the human ear to hear. The Restorer
function generates the signals eliminated upon compression, restoring the sound to conditions near those
of the original sound before compression. It also corrects the sense of volume of the bass to obtain richer
sound with compressed audio signals.
Setting items Setting details
Restorer
Set the mode for
“Restorer”.
Off : Do not use “Restorer”.
Mode1 (High) : Optimized mode for compressed sources with very weak
highs (64 kbps and under).
Mode2 (Middle) : Apply suitable bass and treble boost for all compressed
sources (96 kbps and under).
Mode3 (Low) : Optimized mode for compressed sources with normal
highs (96 kbps and over).
• This item can be set with analog signals or PCM signal (Sample rate =
44.1/48 kHz) is input.
• “Restorer” settings are stored for each input source.
• This item default setting for “NETWORK” and “iPod/USB” is “Mode3
(Low)”. All others are set to “Off”.
• This cannot be set when the sound mode is set to “DIRECT” or “PURE
DIRECT”.
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mation
A
dv
anced v
ersion
DVD