Denon AVR-1713, Руководство пользователя

Страница: 24 / 156

21
2
Set up the subwoofer
If using a subwoofer capable of the following
adjustments, set up the subwoofer as shown below.
For details, see your subwoofer’s manual.
n When using a subwoofer with a direct mode
Set the direct mode to “On” and disable the volume adjustment
and crossover frequency setting.
n When using a subwoofer without a direct mode
Make the following settings:
•
Volume
: “12 o’clock position”
•
Crossover frequency
: “Maximum/Highest Frequency”
•
Low pass filter
: “Off”
•
Standby mode
: “Off”
1
Prepare the included setup microphone
Mount the setup microphone on a tripod or stand
and place it in the main listening position.
When placing the setup microphone, adjust the height of the
sound receptor to the level of the listener’s ear.
Sound receptor
Setup
microphone
If you do not have a tripod or stand, set up the microphone on, for
example, a seat without a back.
NOTE
• Do not hold the setup microphone in your hand during
measurements.
• Avoid placing the setup microphone close to a seat back or wall as
sound reflections may give inaccurate results.
Set up speakers (Audyssey® Setup)
3
Connect the setup microphone to the SETUP MIC
jack of this unit.
Audyssey Setup
Your AVR can automatically measure the
acoustics of your room and the optimize
your speakers.
Start
When the setup microphone is
connected, the following screen is
displayed.
• For information about setting up and connecting the speakers, see
“Installation/connection of speakers (Advanced)” ( v page 69 ).
• For connection to a TV, see “Connecting this unit to a TV via HDMI
connections” ( v page 9 ).
Preparation
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mation
Basic v
ersion
v See overleaf