Denon AVR-1404/484, Руководство по эксплуатации

Страница: 21 / 92

21
ENGLISH
3
4
5
6
7
1
VIDEO GAME
ROCK ARENA
JAZZ CLUB
VIRTUAL
MATRIX
5CH STEREO
Use this to enjoy video game sources.
Use this mode to achieve the feeling of a live concert in an arena with reflected
sounds coming from all directions.
This mode creates the sound field of a live house with a low ceiling and hard walls.
This mode gives jazz a very vivid realism.
Select this mode to enjoy a virtual sound field, produced from the front 2-channel
speakers.
Select this to emphasize the sense of expansion for music sources recorded in
stereo. Signals consisting of the difference component of the input signals (the
component that provides the sense of expansion) processed for delay are output
from the surround channel.
In this mode, the signals of the front left channel are output from the left surround
channel, the signals of the front right channel are output from the right surround
channel, and the same (in-phase) component of the left and right channels is output
from the center channel. This mode provides all speaker surround sound, but
without directional steering effects, and works with any stereo program source.
14 DSP SURROUND SIMULATION
Surround modes and their features
• This unit is equipped with a high performance DSP (Digital Signal Processor) which uses digital signal
processing to synthetically recreate the sound field. One of 7 preset surround modes can be selected
according to the program source and the parameters can be adjusted according to the conditions in the
listening room to achieve a more realistic, powerful sound. These surround modes can also be used for
program sources not recorded in Dolby Surround Pro Logic or Dolby Digital.
2
MONO MOVIE
(NOTE 1)
Select this when watching monaural movies for a greater sense of expansion.
Depending on the program source being played, the effect may not be very noticeable.
In this case, try other surround modes, without worrying about their names, to create a sound field suited to
your tastes.
NOTE 1: When playing sources recorded in monaural, the sound will be one-sided if signals are only input to
one channel (left or right), so input signals to both channels. If you have a source component with only
one audio output (monophonic camcorder, etc.) obtain a “Y” adaptor cable to split the mono output
to two outputs, and connect to the L and R inputs.
Personal Memory Plus
This set is equipped with a personal memorize function that automatically memorizes the surround modes
and input modes selected for the input different sources. When the input source is switched, the modes set
for that source last time it was used are automatically recalled.
The surround parameters, tone control settings and playback level balance for the different output
channels are memorized for each surround mode.
NOTE:
Only the STEREO mode can be used when playing PCM signals with a sampling frequency of 96 kHz (such
as from DVD-Video discs that contain 24 bit, 96 kHz audio). If such signals are input during playback in one
of the other surround modes, the mode automatically switches to STEREO.
If the DTS signals are input during playback in VIRTUAL surround mode, the mode automatically switches to
STEREO.
(Remote control unit)
The surround mode switches in the following order
each time the DSP SIMULATION button is pressed:
MONO MOVIE ROCK ARENA
JAZZ CLUB VIDEO GAME
MATRIX
DSP surround simulation
1 Select the surround mode for the input channel.
2
3 3
1
• To operate the surround mode and surround parameters from the remote control unit.
2
To enter the surround parameter setting mode, press the SURROUND
PARAMETER button.
• The surround parameter switches in the following order each time the
SURROUND PARAMETER button is pressed for the different surround
modes.
ROOM SIZE
EFFECT
DEFAULT
EFFECT LEVEL
DEFAULT
DELAY
DEFAULT
• ROCK ARENA
• JAZZ CLUB
• VIDEO GAME
• MONO MOVIE
• MATRIX • VIRTUAL
(Remote control unit)
3
Display the parameter you want to adjust, then use the (left) and (right)
buttons to set it.
(Remote control unit)
(1) ROOM SIZE
Use the (left) and (right) buttons to set the room size.
(Remote control unit)
ROOM SIZE MED
LARGE MED-L MED MED-S SMALL
(Initial)
(left) button (right) button
(2) EFFECT LEVEL
Use the (left) and (right) buttons to set the effect level.
(Remote control unit)
EFFECT LEVEL 10
15 10 1
(Initial)
(left) button (right) button