Denon AVR-1404/484, Руководство по эксплуатации

Страница: 18 / 92

18
ENGLISH
13 SURROUND
Before playing with the surround function
• Before playing with the surround function, be sure to use the test tones to adjust the playback level from each
speakers. This adjustment can be performed from the remote control unit, as (described) below.
• The adjustment with the test tones is only effective in the DOLBY/DTS SURROUND modes.
The adjusted playback levels for the different surround modes are automatically stored in the memory of each
surround modes.
1
2
Press the TEST TONE button.
(Remote control unit)
Test tones are output from
the different speakers.
Use the channel volume
adjust buttons to adjust so
that the volume of the test
tones is the same for all
the speakers.
(Remote control unit)
3
After completing the adjustment, press the
TEST TONE button again.
1
Set the DOLBY/DTS SURROUND (Dolby Pro
Logic
II or Dolby Digital or DTS) modes.
(Main unit) (Remote control unit)
NOTE: Please make sure the “AUDIO”
position of the slide switch on the
remote control unit.
(Remote control unit)
2
2
2, 3
1
• After adjusting using the test tones, adjust the channel levels either according to the playback sources or to
suit your tastes, as (described) below.
FL CNTR FR SR SL
SW
1
Select the speaker whose level you want to
adjust.
2
2 1
The channel switches as shown below each
time the button is pressed.
Adjust the level of the selected speaker.
(Main unit) (Remote control unit)
NOTE: Please make sure the “AUDIO”
position of the slide switch on the
remote control unit.
(Main unit) (Remote control unit)
Only adjustable when
the channel is
selected with the CH
VOL buttons on the
main unit.
2
2
1
Default setting of channel level is 0 dB.
The level of the selected speaker can be adjusted
within the range of +12 to –12 dB.
Dolby Surround Pro Logic II mode
1
Select the function to which the component
you want to play is connected.
Example: DVD
5, 7 4, 6 1 2
4, 6
5, 7
1
5, 7
2
The Dolby Surround Pro
Logic
II Cinema or Music
mode can be chosen
directly by pressing the
CINEMA or MUSIC
button on the remote
control unit during
playback in the Dolby
Surround Pro Logic
II
mode.
(Main unit) (Remote control unit)