Get
ting Star
ted
Connections
Set
up
Pla
ybac
k
Remot
e Contr
ol
Multi-Zone
Inf
or
mation
Tr
oubleshooting
Multi-Zone Operations
Turning the Power On and Off
G
Operation on the main unit
H
Press
<ZONE2 ON/OFF>
,
<ZONE3 ON/OFF>
or
<ZONE4 ON/OFF>
for
the zone to be operated.
When the power turns on, the multi-zone indicator lights on the display.
G
Operation on the remote control unit
H
In the zone mode you want to operate, press
[ON]
or
[OFF]
.
Selecting the Input Source
G
Operation on the main unit
H
q
Press
<ZONE2/3/4 / REC SELECT>
and select the zone to be adjusted.
w
Turn
<SOURCE SELECT>
.
G
Operation on the remote control unit
H
In the zone mode you want to operate, press
[SOURCE SELECT]
.
Adjusting the Volume
G
Operation on the main unit
H
q
Press
<ZONE2/3/4 / REC SELECT>
and select the zone to be adjusted.
w
Turn
<VOLUME>
to adjust.
G
Operation on the remote control unit
H
In the zone mode whose volume you want to adjust, press
[VOLUME]
.
[Variable range]
– – –
–70dB
~
–40dB
~
18dB
• The volume can be adjusted when GUI menu “Manual Setup”
– “Zone Setup” – “(select the zone)” – “Volume Level” is set to
“Variable”. The volume can be increased up to the value set at
GUI menu “Manual Setup” – “Zone Setup” – “(select the zone)”
– “Volume Limit” (
v
page 38).
• The volume for ZONE2 and ZONE3 can be adjusted with the remote
control unit.
SOURCE SELECT
<ZONE2 ON/OFF>
<ZONE2/3/4/ REC SELECT>
<ZONE3 ON/OFF> <ZONE4 ON/OFF>
VOLUME
[Z2 ON]
[OFF]
[MUTE]
VOLUME
[ AMP]
SOURCE
SELECT
About the button names in these explanations
<
>
: Buttons on the main unit
[
]
: Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit
ZONE2 MENU
INPUT :DVD
SIGNAL:ANALOG
VOL. :-40dB
>Bass 0dB
HPF OFF
Treble 0dB
Lch Lev. 0dB
Rch Lev. 0dB
ZONE2 MENU
>Channel STEREO
Vol.Lev. VAR
P.On Lev. LAST
Vol.Limit OFF
Mute Lev. FULL
Turning off the Sound Temporarily
In the zone mode for which you want to mute the sound, press
[MUTE]
.
The sound is reduced to the level set at GUI menu “Manual Setup”
– “Zone Setup” – “(select the zone)” – “Mute Level” (
v
page 38).
To cancel, either adjust the volume or press
[MUTE]
again.
The setting is canceled when the zone’s power is turned off.
• The source selected for ZONE3 is also output from the recording
output connectors.
• When the
[MENU]
is selected, it is possible to carryout “Zone Setup”
looking at the on-screen display in ZONE2. Also, when the “OSD” is
set as “ZONE2/ZONE3”, the on-screen display comes on the ZONE2
monitor when ZONE3 has been operated so it is possible to operate
it looking at this.
NOTE
• The digital signal from the digital input connectors (OPTICAL/
COAXIAL) are output to the analog audio connectors in ZONE2 and
ZONE3 in the case of PCM (2-channel) signals only.
• Digital audio signals input from the DENON LINK or HDMI connectors
cannot be played in multi-zone.
• The digital output (OPTICAL) from ZONE2 and ZONE4 cannot be
copyrighted network signals (internet radio, media server, and
USB).
• When certain digital signals are being input, noise may be output
from the ZONE2 and ZONE3 audio output connectors.
(ZONE3 or
ZONE4 mode)
[OFF]
[ON]
[MENU]
[ZONE SELECT]
[OFF]
[MUTE]
Multi-zone
indicator
[ON]
VOLUME
[MENU]
SOURCE SELECT
(Main remote control unit)
(Sub remote control unit)
Multi-Zone
