8
Setup
Connections
7.1
Items not listed in
Introduction > Box Contents
are sold separately.
Important:
Connect all cables securely and properly (with stereo cables: left with left, right with right). Do
not
bundle or wrap them with the power cable.
Not all of these steps may apply to your specific audio/video setup, but you will need to do
Steps 1
and
5
at the very least.
1.
Connect DN-500BD MKII to your TV monitor or display by doing one of the following:
•
Use an HDMI cable to connect the
HDMI Output
to the HDMI input of your TV monitor or display.
•
Audio only: Use a coaxial cable to connect the
coaxial output
to the coaxial input of your TV monitor.
2.
Optional:
Connect DN-500BD MKII to your sound system by doing either/both of the following:
•
Use XLR cables or a stereo RCA cable to connect the
audio outputs
(balanced or unbalanced) to
the analog inputs of your external receiver, amp, powered speakers, etc.
•
Use RCA cables to connect the
7.1 outputs
to your 7.1 surround sound system.
3.
Optional:
Connect a USB hard drive with playable content to the
USB port
(front panel or rear panel).
4.
Optional:
Use a 9-pin D-Sub cable to connect the
Remote Input
to a host device (usually a computer)
that will control it.
5.
Optional:
Use an Ethernet cable to connect the
LAN port
to your modem or a host device.
6.
After completing all the connections, use the included power cable to connect the
AC In
to a power outlet.
TV or display
Power
Powered Monitors,
receiver, amp, etc.
Modem
USB hard drive
To 7.1
sound system
Содержание DN-500BD MKII
Страница 2: ...2 ...
Страница 148: ...denonpro com Manual Version 1 1 ...