26
•
Sound Control
o
Crossover:
Select the crossover frequency for your sound system:
Off
,
40Hz
,
60Hz
,
80Hz
,
90Hz
,
100Hz
,
110Hz
,
120Hz
,
150Hz
,
175Hz
,
200Hz
, or
250Hz
. Any audio content whose
frequency is lower than this setting will be sent to your subwoofer, if any.
o
Dynamic Range:
When set to
On
, DN-500BD MKII will apply some compression to smooth
out the high and low volume levels of the audio. When set to
Off
, DN-500BD MKII will not
use any compression. When set to
Auto
, DN-500BD MKII will use the compression
specified by the Blu-ray Disc being played (for other discs, there will be no compression).
Important:
This option applies to the
audio outputs
and
7.1 outputs
. It also applies to the
HDMI output
if the
Format > HDMI Audio
setting is
PCM
.
•
Speaker Setting
o
Configuration:
Select the channel configuration of your sound system:
2.x
,
3.x
,
4.x
,
5.x
, or
7.x
.
o
Test Tone:
Select this to play a test tone through a speaker in your sound system. Use the
left
/
right cursor buttons
(
) to select the speaker from the diagram.
•
Output Control
o
Output Volume:
When set to
Variable
, you can use the
Vol –
/
+
buttons on the remote
control to adjust the volume level of the
audio outputs
and
7.1 outputs
. When set to
Fixed
, the
Vol –
/
+
buttons on the remote control will be disabled, and the volume will be set
to the Maximum Volume (see below).
o
Maximum Volume:
Select the highest possible volume level of the
audio outputs
and
7.1
outputs
:
-10dB
,
-6dB
,
0dB
,
+6dB
, or
+10dB
. Be careful—higher volume levels can cause
distortion (“clipping”), which can damage your amplifier or speakers. If the Output Volume
(see above) is set to
Fixed
, the
audio outputs
and
7.1 outputs
will play audio at this
volume level.
Network Setup
•
Function
o
BD-Live Network Access:
Select the level of access to BD-Live content on the internet:
Permitted
(you can access all content),
Partial Permitted
(you can access only certain
content),
Prohibited
(BD-Live content is blocked). DN-500BD MKII must be connected to
the internet (via its
LAN port
) for this feature to work properly.
o
BD-Live:
These options let you manage where DN-500BD MKII downloads files while
accessing BD-Live content, if any. Press
OK
to open a window to configure each option.
BUDA Setup:
This window shows the amount of free space on the selected drive (see
below). Press
OK
to format the drive (this will erase all content on the drive).
Please select the BUDA mode:
Select the drive you want to use to store downloaded
BD-Live files:
External
(a USB drive connected to DN-500BD MKII’s USB port) or
On
board
(DN-500BD MKII’s internal memory). Note that you will need a certain amount of
free space on the drive to download some content properly (see above).
Important:
Your USB drive must not use an NTFS file system.
Содержание DN-500BD MKII
Страница 2: ...2 ...
Страница 148: ...denonpro com Manual Version 1 1 ...
