28
Device Setup
•
Firmware
o
Version:
DN-500BD MKII’s current firmware version.
o
Upgrade:
When you are upgrading DN-500BD MKII’s firmware, select how DN-500BD MKII
will access the firmware file:
Disc
,
USB Storage
, or
Network
. Follow the instructions
included with the firmware update file.
•
Setting
o
Remote Control Code:
If you are using other similar Denon Professional products that
unintentionally respond to DN-500BD MKII’s remote control, select a different remote
control code to keep its communication separate:
Code 1
,
Code 2
, or
Code 3
.
o
HDMI CEC:
When set to
On
, DN-500BD MKII’s remote control can send commands to DN-
500BD MKII as well as a TV connected to the
HDMI output
(your TV must support HDMI
CEC). When set to
Off
, DN-500BD MKII’s remote control will send commands to DN-
500BD MKII only.
o
Setup Management:
Select
Export
to save all of DN-500BD MKII’s current settings as a
.bin
file on a connected USB drive. Select
Import
to import a previously saved
.bin
file of
DN-500BD MKII’s settings from a connected USB drive.
o
Reset Factory Defaults:
Select
OK
to erase all of DN-500BD MKII’s current settings and
restore its original/default settings, or select
Cancel
to keep the current settings. If you
select
OK
, you will see the Initial Wizard screen (as you did when you first set up DN-500BD
MKII).
o
Serial Bit Rate:
Select the serial bit rate:
9600,
38400,
or
115200
.
Options
The Options menu lets you change certain settings during playback without having to enter the Setting
menu. The menu will appear on the left side of the screen. The available Options will vary based on the
kind of media you are currently using: DVD or Blu-ray Disc (see
BDMV Options
below), video file (see
Video Options
below), audio CD (see
Audio CD Options
below), audio file (see
Audio
File Options
below), or picture (see
Picture File Options
below).
To show
/
hide the Options menu,
press
Option
on the remote control. Alternatively, press
Return
to
close the Options menu.
In the
Options
menu:
•
To move through a list,
use the
up
/
down cursor buttons
(
). The current item is outlined in
blue.
•
If there is an arrow to the right of an item (
), you can press the
OK
or the
right cursor button
(
)
to open a submenu with additional options.
•
In a submenu, if there are arrows above or below it (
), you can use the
up
/
down cursor
buttons
(
) to select the previous/next option. Press
OK
or the
left cursor button
(
) to
confirm your choice and close the submenu.
•
If there is not an arrow to the right side of an item, you can press
OK
to cycle through the available
options or to execute the command.
Содержание DN-500BD MKII
Страница 2: ...2 ...
Страница 148: ...denonpro com Manual Version 1 1 ...
