Denlar ClockBox Pro, Инструкция по установке и эксплуатации

Страница: 30 / 38

Clock Box PRO Installation and Operations Manual V1.1 LAB-110218
30
Monitoring System
iii. Temperature at the Hood is above 190 ’ F.
1. If checked, a signal is sent when the Hood reaches 190 ’ F.
iv. The Hood is powered OFF.
1. If checked, a signal is sent when the Hood is not powered ON.
v. The Hood is in Maintenance Mode.
1. If checked, a signal is sent when the Hood is switched from Operating Mode to
Maintenance Mode.
b. Each of the five events above prevents the range from being powered ON.
Sending a signal to the building monitoring system or alarm system
The Clock Box PRO provides a discreet COM, NO, and NC relay circuit. To send a signal to the monitoring
system, the installer can connect to the appropriate configuration required to alert the monitoring system.
In the Clock Box PRO control box, there is a six-position plug for the monitoring system. The first three wires
are colored orange, white, and yellow. The orange is the COM. The white is the NO, and the yellow is the NC. The
installer
’ s plug is a push-to-connect for solid or terminated ferruled wires. The Clock Box PRO relay changes states
based on the events selected on the Monitoring Screen (See above).