Denlar ClockBox Pro, Инструкция по установке и эксплуатации

Страница: 13 / 38

Clock Box PRO Installation and Operations Manual V1.1 LAB-110218
13
Clock Box PRO Stand-Alone Interface Diagram
Plug‘N’Play
1. 120 VAC Supply for Clock Box PRO
d. Cable (not provided) runs from the Main Breaker Panel to the Power Source Disconnect
2. 120 VAC Input/Output to/from the Clock Box PRO encased in 16 mm ENT Flexible Conduit (provided)
a. 10 Ft in length
b. Two plenum cables
c. Runs from the Clock Box PRO to the Power Source Disconnect
d. Two four-position connectors
i. Labeled CB1
1. Four wires
ii. Labeled CB2
1. Three wires
e. One eight-position connector
i. Labeled CB3
1. Seven wires
3. 120 VAC Input to Gas Disconnect encased in 16 mm ENT Flexible Conduit (provided)
a. 10 Ft in length
b. One plenum cable
8