Denlar ClockBox Pro, Инструкция по установке и эксплуатации

Страница: 7 / 38

Clock Box PRO Installation and Operations Manual V1.1 LAB-110218
7
1. Four Wires
4. 120 VAC Input/Output to/from the Clock Box encased in 16 mm ENT Flexible Conduit (provided)
a. 10 Ft in length
b. Two plenum cables
c. Cable from the Clock Box to the Power Source Disconnect for the Range (Gas or Electric)
d. Two four-position connectors
i. Labeled CB1
1. Four wires
ii. Labeled CB2
1. Three wires
e. One eight-position connector
i. Labeled CB3
1. Seven wires
5. 120 VAC Input to Gas Disconnect (DED option) encased in 16 mm ENT Flexible Conduit (provided)
a. 10 Ft in length
b. One plenum cable
c. Cable from the Gas Disconnect junction box to the Electrical Disconnect
d. Two four-position connectors
i. Labeled GD2
1. Located at the Gas Disconnect junction box
ii. Labeled GD3
1. Located at the Electrical Disconnect
6. 24 VDC Input / Output Communication cable encased in 16 mm ENT Flexible Conduit (provided)
a. 25 Ft in length
b. One communication (Ethernet) cable and one plenum cable
c. Connects to the Clock Box PLC and HMI / Touch Screen
7. Power Source Disconnect
a. One four-position connector
i. Label depends on the Power Source Disconnect option
1. D1000-E-120/220 (Electrical)
a. Labeled ED1
2. D1000-G (Gas)
a. Labeled GD1
3. D1000-DRD
a. Labeled ED1
4. D1000-DED
i. D1000-E-120/220 Labeled ED1
ii. D1000-G Labeled GD1
iii. Jumper Wire JP1, ED2,GD2
8. Connecting the four-position connectors from the Hood, the Clock Box, and the Power Source
Disconnect
.
9.
120-220 VAC supply line to Range via Electric Disconnect (not provided)
10.
24VDC and 120VAC Hood interface cable (provided)