smartDEN
IP-16R-XX
User Manual
13 Apr 2021
-
55
-
10.3. MQTT (for smartDEN IP-16R-MQ only)
The
smartDEN IP-16R-MQ
supports MQTT protocol V3.1.1. The module runs a
MQTT client that publishes the relays states, and subscribes to messages to switch
the relays On/Off.
Figure 10.2.
smartDEN IP-16R-MQ
working as MQTT client
Two types of publish/subscribe topics modes are supported: plain (non-encrypted)
and encrypted.
10.3.1. Plain (non-encrypted) mode
In this mode,
smartDEN IP-16R-MQ
uses non-encrypted topics to get relays
states and switch relays On/Off.
Encrypt
option in
MQTT Settings
page must be turned off in order to work
in this mode.
Below are described all the available topics in order to communicate with
smartDEN IP-16R-MQ via MQTT protocol. All topics begin with the following prefix:
SmartDEN_MQTT16R/<
MAC identifier
>/
Where, <
MAC identifier
> is the MAC address of the board written without the
colons. For example:
SmartDEN_MQTT16R/E8EADA123456/Get/#
SmartDEN_MQTT16R/E8EADA123456/Set/All
Содержание smartDEN IP-16R Series
Страница 63: ...smartDEN IP 16R XX User Manual 13 Apr 2021 63 Figure 10 9 Inputs state notifications...
Страница 66: ...smartDEN IP 16R XX User Manual 13 Apr 2021 66 13 Appendix 2 Application reply formats 13 1 XML reply...
Страница 67: ...smartDEN IP 16R XX User Manual 13 Apr 2021 67 13 2 JSON reply...