Denkovi smartDEN IP-16R Series, Руководство пользователя

Страница: 34 / 67

smartDEN IP-16R-XX User Manual
13 Apr 2021
-
34
-
8.14. MQTT Settings (for smartDEN IP-16R-MQ only)
These settings let you configure the MQTT communication of smartDEN IP-16R-
MQ.
Figure 8.16. MQTT settings

Enable
– enable/disable the MQTT protocol;

MQTT Server - the MQTT server (broker) IP address or domain name (max.
22 chars);

Server Port
– the MQTT server listening port (the default port is 1883);

Username
– username, if used (max. 10 chars), used for encrypted mode
only;

Password
– password, if used (max. 10 chars), used for encrypted mode
only;

Publish Mode :
o
Periodically
– notifications are send periodically (the period is defined by
the Publish Period value);
o
Edge Triggered
– notifications are triggered by events (change of digital
inputs state or crossing of analog value/temperature over or below the
predefined threshold values);
o
Edge Tri Periodically - combination of the above two modes. In
that mode notifications are send just like the mode Edge Triggered but
periodically (the period is defined by the Publish Period value);

Publish Period, sec
– the time interval between two successive notifications
(from 5 to 250 seconds);

Encrypt Topic
– when enabled, the MQTT topic is encrypted;