Denkovi smartDEN IP-16R Series, Руководство пользователя

Страница: 41 / 67

smartDEN IP-16R-XX User Manual
13 Apr 2021
-
41
-
10. Integration protocols
10.1. SNMP (for smartDEN IP-16R only)
smartDEN IP-16R supports SNMPv1 protocol
– snmpget and snmpset. Most of
the parameters can be configured/read via these commands. Read-only community
string is used for reading and Read-Write Community String is used for changing the
parameters. Parameters that can be changed, are grouped according to their
functions in the tables below. To obtain a valid OID number it is necessary to replace
the "
x " symbol with the prefix " .1.3.6.1.4.1.42505 ". Also all the snmp commands are
described in the MIB file .
During SNMP access, it must be used snmpget and snmpset only to one
OID and not to group of OIDs.
10.1.1. Product
Table 10.1. Product parameters
OID Name Access Description Syntax
x .6.1.1.0 Name read-only Description of the module DISPLAYSTR
ING
x .6.1.2.0 Version read-only Current firmware version DISPLAYSTR
ING
x .6.1.3.0 Date read-only Current firmware version
build date DISPLAYSTR
ING
10.1.2. Setup
Table 10.2. Setup
Start OID End OID Name Access Description Syntax
x .6.2.1.0 ... SystemDate read-
write System Date
(dd/mm/yyyy) DISPLAYST
RING
x .6.2.2.0 ... SystemTime read-
write System Time
(hh:mm) DISPLAYST
RING
x .6.2.3.1.2.0 x .6.2.3.1.2.15
RelayName read-
write Relay Name
(maxlen=7) DISPLAYST
RING (SIZE
(0..7))
x .6.2.3.1.3.0 x .6.2.3.1.3.15 RelayState read-
write Relay State
(off-0, on-1) INTEGER
{off(0), on(1)
}
x .6.2.3.1.4.0 x .6.2.3.1.4.15 RelaySetPul
sePeriod read-
write Relay Set
Pulse Period
(0..65535),
ms(x100) INTEGER32
(0..65535)
x .6.2.3.1.5.0 x .6.2.3.1.5.15
RelayStartPu
lse read-
write Relay Start
Pulse
(0..65535),
ms(x100) INTEGER32
(0..65535)