DENGENSHA WS-100, Инструкция по эксплуатации

Страница: 25 / 39

18
DENGENSHA
7 - 2. Numerical screen (main screen)
This main screen appears at power on.
Displayed setting items are able to change by
Pointing cursor to the item by pushing
↑ ↓ ← →
button and
Pushing ENTER button and
Selecting menu or value by pushing
↑ ↓ ← →
button and
Pushing ENTER button.
7 - 3. Numeric screen in current measurement mode
When WS-100 is current measurement mode (setting item [Detect] is [Current]), LCD displays
following items.
 Display items
①
Average welding current (rms)
②
Welding time (cyc and ms are available)
③
Conduction angle
 Setting items
・
Range Upper limit of measurement current.
Following four value is selectable when current sensor type is ISO.
(system screen item [Toroidal] is [ISO])
6kA available when welder type is AC (system screen item [Welder] is [AC])
10kA available when welder type is DC (system screen item [Welder] is [DC])
25kA
50kA
・
When sensor type is not ISO, these value changes automatically for fitting sensor.
・
over-range error is displayed when measurement current exceeds this value.
・
Measurement accuracy may degrade when selecting range is too large. Please
select requisite minimum value.
・
W-Zoom Zoom level of current waveform height in graphic screen.[1
～
10]
・
First WS-100 starts calculating average welding current from this setting
cycle. (1
～
99cyc)
・
Last WS-100 completes calculating average welding current at this setting
cycle.(1
～
99cyc:this value should be larger than the value of the First)
・
Pulse This area displays measurement mode.
②
①
③