DENGENSHA WS-100, Инструкция по эксплуатации

Страница: 30 / 39

23
DENGENSHA
7 - 7. System screen
Displayed setting items are able to change by
Pointing cursor to the item by pushing
↑ ↓ ← →
button and
Pushing ENTER button and
Selecting menu or value by pushing
↑ ↓ ← →
button and
Pushing DISP/CANCEL button to abort alternation and
Pushing ENTER button to alter.
(1) Setting items
 Detect selection of measurement mode
Current
：
current measurement mode
Press
：
Pressure measurement mode
 Welder selection of weld machine type
AC
：
AC welder
、
AC-Inverter welder
DC
：
MFDC welder, Three-phase rectifier welder,
single-phase rectifier welder
 PC Connect PC communication mode
OFF
：
disconnection mode (do not communicate)
ON
：
connection mode (attempt to communicate)

Toroidal selection of (Sensitivity) toroidal coil
ISO
：
ISO standard toroidal coil when using (150mV/1kA)
Half
：
The coil when using 1/2 sensitivity (relative to ISO)
X10
：
The coil when using 10x sensitivity (relative to ISO)
Free
：
Available to set numeric sensitivity value by “ToroidalSens”