DENGENSHA WS-100, Инструкция по эксплуатации

Страница: 9 / 39

2
DENGENSHA
1 - 2. Application of the equipment and safety
This equipment is intended for use, exclusively, for the purpose specified in associated
documentation (instruction manual, specification sheet). Employment of the equipment for any
other purpose is regarded as a deviation from the intended application.
Improper usage other than intended may cause
：
(a) Serious injury or death,
(b) Damage to this and/or other equipment
DENGENSHA equipment uses the latest state of the art technology and is made to operate safely
and reliably. The equipment should be used only for the intended purpose. Dengensha will not
accept liability for misuse of the equipment.
1 - 3. Safety considerations
We emphasize that DENGENSHA MFG.CO., LTD. disclaims all liability for damage and
malfunctions resulting from non-compliance with the following instructions in particular
：
(a) The instruction manual must be read and strictly understood. If there are any questions,
contact our business department and/or each office.
(b) Unauthorized conversion and/or modification affecting the safety of the equipment are not
allowed.
(c) The equipment may not be equipped or operated with products of other manufacturers
whose use is not expressly permitted in the associated manuals.
(d) For the items(b)and(c), consult with our business department/each office on safety.
1 - 4. Safety during operation
CAUTION
(1) Injury prevention from electrode or clamping force
Resistance welding machine generally uses electrode pressurizing force or clamping
force of several thousands Newtons or more.
Since this large force is dangerous, do not put hands, fingers, or any part of the body
between the electrodes, and between the clamps. Failure to observe this warning can
cause serious injury. The same warning applies to the electrodes when opening.
A guard is provided to protect against a pinch point when the upper electrode opens.
Do not put hands, fingers or any part of the body between the upper electrode and the
cylinder body. Operation should not occur unless the guard is in place.
CAUTION
(2) Wearing safety gear
Spark or spatter that is produced during welding operation may cause eye injury.
Since it is difficult to eliminate spark or spatter completely, it is necessary to put on
protective glasses, helmet, gloves and non-combustible working clothes to safeguard
against splash and spatter.