Deltronic Labs Ticket Eater D2000, Руководство пользователя

Страница: 20 / 50

TT-2000 Ticket Eater
™
by Deltronic Labs June 2015
20
Printers & Loading Paper
Star thermal printer
This printer is used in some older machines. The
printer is mounted on the inside of the top door.
The printer control board (circled in photo) has 3
LEDs. The top LED is a green “power on”
indicator. The middle LED is a red “error”
indicator. It is lit when there is a problem such
as out of paper.
The bottom LED is a green “on line” indicator.
The printer control board has two switches. The
top switch is an on-line / off-line toggle. The
bottom switch feeds paper.
Custom VKP80II thermal printer
This printer is has replaced the obsolete PPU-
231. The printer sits on a shelf inside the
cabinet. To load paper:
1. Start with the printer on.
2. Make sure the paper comes from the
bottom of the roll.
3. Make sure the paper end has a clean
square cut.
4. Insert the paper between the green guides
in the back of the printer. The printer will
detect the paper and load it.
Citizen PPU-231 thermal printer
This printer sits on shelf inside the cabinet.
On the side of the printer are a paper-feed
switch and an on/off toggle switch (circled in
photo). Please refer to the printer manual for
further instruction on printer care and
functions. Refer to the next page for paper
loading instructions.