English / Page 31
Connection of the electronic aerial
• Connect the electronic aerial to socket X20a (26) in the control unit.
8. Connection and initial operation of the accessories
8.1 Remote
control
Attention!
Please set your individual coding by means of the coding
buttons on hand transmitter.
Adapting the control unit to a hand transmitter
See 6.2, step 6. Programming of remote control page 22.
In case of power failure the coding remains stored.
Operational check:
• Operate the hand transmitter from a distance of approx. 15 m.
- The door should now start to move.
-> If this is not the case, see test instructions 'remote control'.
Advice:
When installing, make sure that the aerial is properly aligned
in order to achieve the best possible range. (Beware of the fact
that metal parts have a shielding effect.)
