English / Page 16
5.3.2 Dynamic 3-101 - 3-108
1. Move the door by hand to ist mechanical OPEN travel limit.
2. Open housing cover on door operator.
3. Release the stop (grub screw J) of control cam (B).
4. Set control cam (B) in such way, the the reference point switch (G) is
actuated as shown in fig. 12 (position H), (approx. 2 angular degrees from
switch point).
5. Fix control cam (B) by screwing on grub screw (J).
6. Close the housing cover again.
7. Connect to mains and actuate button CLOSE DOOR (12).
The door travels to the travel limit CLOSE, which is pre-set by factory
Fig. 12: Setting the reference point
5. Initial operation of control unit Control 44 / Control 45
A B C D E F
C
J
H
G
