Delta VIS100-30G12D, Руководство по эксплуатации, Страница: 8 / 37

Chapter 2 Input and Output Interface
VIS100 Vision Sensor Operating Manual
2-1
Chapter 2
Input and Output Interface
VIS100 input and output interfaces include the following:
1) I/O
2) Ethernet
The pins and wiring connections are defined and detailed below.
2.1 Input / Output (I/O) Terminal Block

Wiring the Sensor:
Connect and secure the I/O Cable to the I/O Cable connector located on the bottom of the Vision Sensor.
The following table lists the I/O Cable signal connections.
Serial No. Color Signal Description
1
Red 24V
Voltage Supply Positive Pole
2
Yellow 0V
Voltage Supply Negative Pole
3
Black COMM
Common contact
4
Grey IN1
Input 1
5
Brown IN2
Input 2
6
White OUT1
Output 1
7
Green OUT2
Output 2
8
Orange GND
ISO_GND