Foreword
VIS100 Vision Sensor Operating Manual
Thank you for your purchase of the high performance Delta Vision Sensor VIS100 from Delta Electronics
Inc. This operating manual covers the component description, installation, operation, troubleshooting,
peripherals, and maintenance.
To guarantee proper installation and operation of the system, please carefully read this operating manual
and safe keep it for future reference.
Precautions
1. Please check the signal connections, for example input voltage and polarity, before powering on to
prevent damages due to an incorrect voltage input level.
2. Please check that system power is turned off before inspecting the input power source or connecting
the wires. Do not touch the terminals or connect the wires while system power is turned on; as this runs
the risk of electric shock.
3. Please do not disassemble or modify the internal components of the controller.
4. Keep away from interference sources such as high voltage and high frequency noise during
installation.
5. Avoid system operation under the following situations:
(a) Excessive dust and corrosive gasses; (b) high temperature, high humidity, and high levels of
radiation; (c) shock and impact; (d) exposure to direct sunlight
6. Check the ground terminal to the power source for proper connection. Check the terminals for secure
connection.
7. Only use the blower to remove dust from the camera sensor or lens. Do not blow using the mouth to
avoid getting moisture on the components.
8. Gently wipe dust off of the lens using a lens cloth to remove attached dirt. Using excessive force or
inappropriate materials may scratch the lens.