PCI-DMC-A01/B01 User Guide
Chapter 2 Installation Guide
2-4
July 2014
Figure 2.4
Figure 2.5
Step 6: Secure the PCI-DMC-01 card in its PCI slot to the case with a screw.
Step 7: Reinstall the system case. This completes the hardware installation of the
PCI-DMC-01 card.
Hardware Installation Troubleshooting
If you installed the card following the above procedure but the system will not
restart normally, please turn off the system and disconnect the power. Open the
system case and check that the PCI-DMC-01 card is inserted properly. Check to
see if the screw is loose or the PCI-DMC-01 is not properly seated in the PCI slot.
Try removing the PCI-DMC-01 from the PCI slot then restart the system to see if
the system runs normally. If the system runs normally, follow the above procedure
and install the PCI-DMC-01 again. If the system still does not start normally,
please contact your distributor for assistance.
